Interface ArcClose2D

All Superinterfaces:
X3DGeometryNode, X3DNode
All Known Implementing Classes:
ArcClose2D

public interface ArcClose2D extends X3DGeometryNode
ArcClose2D is a polygonal geometry node that defines a linear circular arc, closed by PIE or CHORD line segments, with center (0,0) in X-Y plane, with angles measured starting at positive x-axis and sweeping towards positive y-axis.

X3D node tooltip: [X3DGeometryNode] ArcClose2D is a polygonal geometry node that defines a linear circular arc, closed by PIE or CHORD line segments, with center (0,0) in X-Y plane, with angles measured starting at positive x-axis and sweeping towards positive y-axis.
Package hint: This interface is defined by the X3D Java Language Binding Specification for the Scene Authoring Interface (SAI).
See Also:
  • Method Summary

    Modifier and Type
    Method
    Description
    Provide String enumeration value (baseType xs:NMTOKEN) ["PIE" | "CHORD"] from initializeOnly SFString field named closureType.
    float
    Provide float value unit axis, angle (in radians) within allowed range of (-6.2832,6.2832) from initializeOnly SFFloat field named endAngle.
    Provide org.web3d.x3d.sai.Core.X3DMetadataObject instance (using a properly typed node) from inputOutput SFNode field metadata.
    float
    Provide float value within allowed range of (0,infinity) from initializeOnly SFFloat field named radius.
    boolean
    Provide boolean value from inputOutput SFBool field named solid.
    float
    Provide float value unit axis, angle (in radians) within allowed range of (-6.2832,6.2832) from initializeOnly SFFloat field named startAngle.
    Accessor method to assign String enumeration value ("PIE" | "CHORD") to initializeOnly SFString field named closureType.
    setEndAngle(float newValue)
    Accessor method to assign float value unit axis, angle (in radians) to initializeOnly SFFloat field named endAngle.
    Accessor method to assign org.web3d.x3d.sai.Core.X3DMetadataObject instance (using a properly typed node) to inputOutput SFNode field metadata.
    setRadius(float newValue)
    Accessor method to assign float value to initializeOnly SFFloat field named radius.
    setSolid(boolean newValue)
    Accessor method to assign boolean value to inputOutput SFBool field named solid.
    setStartAngle(float newValue)
    Accessor method to assign float value unit axis, angle (in radians) to initializeOnly SFFloat field named startAngle.
  • Method Details

    • getClosureType

      String getClosureType()
      Provide String enumeration value (baseType xs:NMTOKEN) ["PIE" | "CHORD"] from initializeOnly SFString field named closureType.

      Tooltip: Defines whether pair of line segments connect to center (PIE), or single line-segment chord connects arc endpoints (CHORD).
      • Warning: simple-geometry parameters cannot be changed after initial creation.
      Returns:
      value of closureType field
    • setClosureType

      ArcClose2D setClosureType(String newValue)
      Accessor method to assign String enumeration value ("PIE" | "CHORD") to initializeOnly SFString field named closureType.

      Tooltip: Defines whether pair of line segments connect to center (PIE), or single line-segment chord connects arc endpoints (CHORD).
      • Warning: simple-geometry parameters cannot be changed after initial creation.
      Parameters:
      newValue - is new value for the closureType field.
      Returns:
      ArcClose2D - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
    • getEndAngle

      float getEndAngle()
      Provide float value unit axis, angle (in radians) within allowed range of (-6.2832,6.2832) from initializeOnly SFFloat field named endAngle.

      Tooltip: [0,2pi] Arc extends from startAngle counterclockwise to endAngle, in radians.
      • Warning: simple-geometry dimensions are initializeOnly and cannot be changed after initial creation, avoiding the need for potentially expensive tessellation at run time.
      • Hint: for size animation, modify the scale of a parent/ancestor Transform node instead.
      • Hint: radian units for angular measure https://en.wikipedia.org/wiki/Radian
      Returns:
      value of endAngle field
    • setEndAngle

      ArcClose2D setEndAngle(float newValue)
      Accessor method to assign float value unit axis, angle (in radians) to initializeOnly SFFloat field named endAngle.

      Tooltip: [0,2pi] Arc extends from startAngle counterclockwise to endAngle, in radians.
      • Warning: simple-geometry dimensions are initializeOnly and cannot be changed after initial creation, avoiding the need for potentially expensive tessellation at run time.
      • Hint: for size animation, modify the scale of a parent/ancestor Transform node instead.
      • Hint: radian units for angular measure https://en.wikipedia.org/wiki/Radian
      Parameters:
      newValue - is new value for the endAngle field.
      Returns:
      ArcClose2D - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
    • getMetadata

      X3DMetadataObject getMetadata()
      Provide org.web3d.x3d.sai.Core.X3DMetadataObject instance (using a properly typed node) from inputOutput SFNode field metadata.

      Tooltip: [X3DMetadataObject] Information about this node can be contained in a MetadataBoolean, MetadataDouble, MetadataFloat, MetadataInteger, MetadataString or MetadataSet node.
      Specified by:
      getMetadata in interface X3DGeometryNode
      Specified by:
      getMetadata in interface X3DNode
      Returns:
      value of metadata field
      See Also:
    • setMetadata

      ArcClose2D setMetadata(X3DMetadataObject newValue)
      Accessor method to assign org.web3d.x3d.sai.Core.X3DMetadataObject instance (using a properly typed node) to inputOutput SFNode field metadata.

      Tooltip: [X3DMetadataObject] Information about this node can be contained in a MetadataBoolean, MetadataDouble, MetadataFloat, MetadataInteger, MetadataString or MetadataSet node.
      Specified by:
      setMetadata in interface X3DGeometryNode
      Specified by:
      setMetadata in interface X3DNode
      Parameters:
      newValue - is new value for the metadata field.
      Returns:
      ArcClose2D - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
      See Also:
    • getRadius

      float getRadius()
      Provide float value within allowed range of (0,infinity) from initializeOnly SFFloat field named radius.

      Tooltip: (0,+infinity) circle radius, of which the arc is a portion.
      • Warning: simple-geometry dimensions are initializeOnly and cannot be changed after initial creation, avoiding the need for potentially expensive tessellation at run time.
      • Hint: for size animation, modify the scale of a parent/ancestor Transform node instead.
      Returns:
      value of radius field
    • setRadius

      ArcClose2D setRadius(float newValue)
      Accessor method to assign float value to initializeOnly SFFloat field named radius.

      Tooltip: (0,+infinity) circle radius, of which the arc is a portion.
      • Warning: simple-geometry dimensions are initializeOnly and cannot be changed after initial creation, avoiding the need for potentially expensive tessellation at run time.
      • Hint: for size animation, modify the scale of a parent/ancestor Transform node instead.
      Parameters:
      newValue - is new value for the radius field.
      Returns:
      ArcClose2D - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
    • getSolid

      boolean getSolid()
      Provide boolean value from inputOutput SFBool field named solid.

      Tooltip: Setting solid true means draw only one side of polygons (backface culling on), setting solid false means draw both sides of polygons (backface culling off).
      • Hint: mnemonic "this geometry is solid like a brick" (you don't render the inside of a brick).
      • Warning: default value true can completely hide geometry if viewed from wrong side!
      • Hint: if in doubt, use solid='false' for maximum visibility.
      • Warning: solid false not supported in VRML97.
      • Hint: (X3D version 4.0 draft) accessType relaxed to inputOutput in order to support animation and visualization.
      Returns:
      value of solid field
    • setSolid

      ArcClose2D setSolid(boolean newValue)
      Accessor method to assign boolean value to inputOutput SFBool field named solid.

      Tooltip: Setting solid true means draw only one side of polygons (backface culling on), setting solid false means draw both sides of polygons (backface culling off).
      • Hint: mnemonic "this geometry is solid like a brick" (you don't render the inside of a brick).
      • Warning: default value true can completely hide geometry if viewed from wrong side!
      • Hint: if in doubt, use solid='false' for maximum visibility.
      • Warning: solid false not supported in VRML97.
      • Hint: (X3D version 4.0 draft) accessType relaxed to inputOutput in order to support animation and visualization.
      Parameters:
      newValue - is new value for the solid field.
      Returns:
      ArcClose2D - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
    • getStartAngle

      float getStartAngle()
      Provide float value unit axis, angle (in radians) within allowed range of (-6.2832,6.2832) from initializeOnly SFFloat field named startAngle.

      Tooltip: [0,2pi] Arc extends from startAngle counterclockwise to endAngle, in radians.
      • Warning: simple-geometry dimensions are initializeOnly and cannot be changed after initial creation, avoiding the need for potentially expensive tessellation at run time.
      • Hint: for size animation, modify the scale of a parent/ancestor Transform node instead.
      • Hint: radian units for angular measure https://en.wikipedia.org/wiki/Radian
      Returns:
      value of startAngle field
    • setStartAngle

      ArcClose2D setStartAngle(float newValue)
      Accessor method to assign float value unit axis, angle (in radians) to initializeOnly SFFloat field named startAngle.

      Tooltip: [0,2pi] Arc extends from startAngle counterclockwise to endAngle, in radians.
      • Warning: simple-geometry dimensions are initializeOnly and cannot be changed after initial creation, avoiding the need for potentially expensive tessellation at run time.
      • Hint: for size animation, modify the scale of a parent/ancestor Transform node instead.
      • Hint: radian units for angular measure https://en.wikipedia.org/wiki/Radian
      Parameters:
      newValue - is new value for the startAngle field.
      Returns:
      ArcClose2D - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).