GeoTouchSensorObject (X3DJSAIL, X3D Java Scene Access Interface Library)

java.lang.Object
- org.web3d.x3d.jsail.X3DConcreteElement
- - org.web3d.x3d.jsail.X3DConcreteNode
  - - org.web3d.x3d.jsail.Geospatial.GeoTouchSensorObject

All Implemented Interfaces:

X3DChildNode, X3DNode, X3DSensorNode, GeoTouchSensor, X3DPointingDeviceSensorNode, X3DTouchSensorNode
```
public class GeoTouchSensorObject
extends X3DConcreteNode
implements GeoTouchSensor
```
X3D node tooltip: [X3DTouchSensorNode] GeoTouchSensor returns geographic coordinates for the object being selected. GeoTouchSensor can contain a GeoOrigin node.
- Hint: this sensor detects user interactions affecting peer nodes and their child geometry.
- Hint: X3D for Advanced Modeling (X3D4AM) slideset
  http://x3dgraphics.com/slidesets/X3dForAdvancedModeling/GeospatialComponentX3dEarth.pdf
- Warning: requires X3D profile='Full' or else include <component name='Geospatial' level='1'/>
Package hint: This org.web3d.x3d.jsail concrete class is used for implementing a standalone X3D object as a Plain Old Java Object (POJO). If you are writing Java code for use inside an X3D Script node, compile separate code using only the org.web3d.x3d.sai package instead.
See Also:

X3D Abstract Specification: GeoTouchSensor, X3D Tooltips: GeoTouchSensor, X3D Scene Authoring Hints

Field Summary

Fields
Modifier and Type	Field and Description
`static java.lang.String`	`COMPONENT` String constant COMPONENT defines X3D component for the GeoTouchSensor element: Geospatial
`static java.lang.String`	`containerField_DEFAULT_VALUE` containerField describes typical field relationship of a node to its parent.
`static java.lang.String`	`DESCRIPTION_DEFAULT_VALUE` SFString field named description has default value equal to an empty string.
`static boolean`	`ENABLED_DEFAULT_VALUE` SFBool field named enabled has default value true (Java syntax) or true (XML syntax).
`static java.lang.String`	`fromField_DESCRIPTION` fromField ROUTE name for SFString field named description.
`static java.lang.String`	`fromField_ENABLED` fromField ROUTE name for SFBool field named enabled.
`static java.lang.String`	`fromField_HITGEOCOORD_CHANGED` fromField ROUTE name for SFVec3d field named hitGeoCoord_changed.
`static java.lang.String`	`fromField_HITNORMAL_CHANGED` fromField ROUTE name for SFVec3f field named hitNormal_changed.
`static java.lang.String`	`fromField_HITPOINT_CHANGED` fromField ROUTE name for SFVec3f field named hitPoint_changed.
`static java.lang.String`	`fromField_HITTEXCOORD_CHANGED` fromField ROUTE name for SFVec2f field named hitTexCoord_changed.
`static java.lang.String`	`fromField_ISACTIVE` fromField ROUTE name for SFBool field named isActive.
`static java.lang.String`	`fromField_ISOVER` fromField ROUTE name for SFBool field named isOver.
`static java.lang.String`	`fromField_METADATA` fromField ROUTE name for SFNode field named metadata.
`static java.lang.String`	`fromField_TOUCHTIME` fromField ROUTE name for SFTime field named touchTime.
`static java.util.ArrayList<java.lang.String>`	`GEOSYSTEM_DEFAULT_VALUE` MFString field named geoSystem has default quoted value new String[] {"GD","WE"} (Java syntax) or quoted value "GD" "WE" (XML syntax).
`static int`	`LEVEL` Integer constant LEVEL provides default X3D Geospatial component level for this element: 1
`static java.lang.String`	`NAME` String constant NAME provides name of this element: GeoTouchSensor.
`static java.lang.String`	`toField_DESCRIPTION` toField ROUTE name for SFString field named description.
`static java.lang.String`	`toField_ENABLED` toField ROUTE name for SFBool field named enabled.
`static java.lang.String`	`toField_METADATA` toField ROUTE name for SFNode field named metadata.

Fields inherited from class org.web3d.x3d.jsail.X3DConcreteNode
CLASS_DEFAULT_VALUE, containerField_ALTERNATE_VALUES, DEF_DEFAULT_VALUE, USE_DEFAULT_VALUE

Fields inherited from class org.web3d.x3d.jsail.X3DConcreteElement
validationResult

Constructor Summary

Constructors
Constructor and Description
`GeoTouchSensorObject()` Constructor for GeoTouchSensorObject to initialize member variables with default values.
`GeoTouchSensorObject(java.lang.String DEFlabel)` Utility constructor that assigns DEF label after initializing member variables with default values.

Method Summary

All Methods Instance Methods Concrete Methods
Modifier and Type	Method and Description
`GeoTouchSensorObject`	`addComments(CommentsBlock newCommentsBlock)` Add CommentsBlock to contained commentsList.
`GeoTouchSensorObject`	`addComments(java.lang.String newComment)` Add comment as String to contained commentsList.
`GeoTouchSensorObject`	`addComments(java.lang.String[] newComments)` Add comments as String[] array to contained commentsList.
`GeoTouchSensorObject`	`addGeoSystem(SFStringObject newValue)` Add singleton SFStringObject value to MFString geoSystem field.
`GeoTouchSensorObject`	`addGeoSystem(java.lang.String newValue)` Add singleton String value to MFString geoSystem field.
`GeoTouchSensorObject`	`clearGeoOrigin()` Utility method to clear SFNode value of geoOrigin field.
`GeoTouchSensorObject`	`clearGeoSystem()` Utility method to clear MFString value of geoSystem field.
`GeoTouchSensorObject`	`clearMetadata()` Utility method to clear SFNode value of metadata field.
`X3DConcreteElement`	`findElementByNameValue(java.lang.String nameValue)` Recursive method to provide object reference to node or statement by name attribute, if found as part of this element or in a contained element.
`X3DConcreteElement`	`findElementByNameValue(java.lang.String nameValue, java.lang.String elementName)` Recursive method to provide object reference to node or statement by name attribute, if found as part of this element or in a contained element.
`X3DConcreteNode`	`findNodeByDEF(java.lang.String DEFvalue)` Recursive method to provide object reference to node by DEF, if found as this node or in a contained node.
`java.lang.String`	`getAccessType(java.lang.String fieldName)` Indicate accessType corresponding to given fieldName.
`java.lang.String`	`getComponent()` Defines X3D component for the GeoTouchSensor element: Geospatial
`int`	`getComponentLevel()` Provides default X3D component level for this element: 1
`java.lang.String`	`getContainerFieldDefault()` containerField describes typical field relationship of a node to its parent.
`java.lang.String`	`getDescription()` Provide String value from inputOutput SFString field named description.
`java.lang.String`	`getElementName()` Provides name of this element: GeoTouchSensor
`boolean`	`getEnabled()` Provide boolean value from inputOutput SFBool field named enabled.
`java.lang.String`	`getFieldType(java.lang.String fieldName)` Indicate type corresponding to given fieldName.
`GeoOrigin`	`getGeoOrigin()` Provide GeoOrigin instance (using a properly typed node) (deprecated node, optional) from initializeOnly SFNode field geoOrigin.
`java.lang.String[]`	`getGeoSystem()` Provide array of String results from initializeOnly MFString field named geoSystem.
`java.util.ArrayList<java.lang.String>`	`getGeoSystemList()` Utility method to get ArrayList value of MFString geoSystem field, similar to `getGeoSystem()`.
`double[]`	`getHitGeoCoord()` Provide array of 3-tuple double results from outputOnly SFVec3d field named hitGeoCoord_changed.
`float[]`	`getHitNormal()` Provide array of 3-tuple float results from outputOnly SFVec3f field named hitNormal_changed.
`float[]`	`getHitPoint()` Provide array of 3-tuple float results from outputOnly SFVec3f field named hitPoint_changed.
`float[]`	`getHitTexCoord()` Provide array of 2-tuple float results from outputOnly SFVec2f field named hitTexCoord_changed.
`ISObject`	`getIS()` Provide field named IS for establishing IS/connect field connections between ProtoInterface fields and internal ProtoBody nodes.
`boolean`	`getIsActive()` Provide boolean value from outputOnly SFBool field named isActive.
`boolean`	`getIsOver()` Provide boolean value from outputOnly SFBool field named isOver.
`X3DMetadataObject`	`getMetadata()` Provide X3DMetadataObject instance (using a properly typed node) from inputOutput SFNode field metadata.
`double`	`getTouchTime()` Provide double value in seconds from outputOnly SFTime field named touchTime.
`boolean`	`hasElementByNameValue(java.lang.String nameValue, java.lang.String elementName)` Recursive method to determine whether node or statement with given name attribute is found, meaning both objects are attached to same scene graph.
`boolean`	`hasGeoOrigin()` Indicate whether an object is available for initializeOnly SFNode field geoOrigin.
`boolean`	`hasMetadata()` Indicate whether an object is available for inputOutput SFNode field metadata.
`boolean`	`hasNodeByDEF(java.lang.String DEFvalue)` Recursive method to determine whether node with DEFvalue is found, meaning both objects are attached to same scene graph.
`void`	`initialize()` Initialize all member variables to default values.
`GeoTouchSensorObject`	`setCssClass(SFStringObject newValue)` Assign typed object value to SFString cssClass field, similar to `setCssClass(String)`.
`GeoTouchSensorObject`	`setCssClass(java.lang.String newValue)` Assign String value to inputOutput SFString field named class.
`GeoTouchSensorObject`	`setDEF(SFStringObject newValue)` Assign typed object value to SFString DEF field, similar to `setDEF(String)`.
`GeoTouchSensorObject`	`setDEF(java.lang.String newValue)` Assign String value to inputOutput SFString field named DEF.
`GeoTouchSensorObject`	`setDescription(SFStringObject newValue)` Assign typed object value to SFString description field, similar to `setDescription(String)`.
`GeoTouchSensorObject`	`setDescription(java.lang.String newValue)` Assign String value to inputOutput SFString field named description.
`GeoTouchSensorObject`	`setEnabled(boolean newValue)` Assign boolean value to inputOutput SFBool field named enabled.
`GeoTouchSensorObject`	`setEnabled(SFBoolObject newValue)` Assign typed object value to SFBool enabled field, similar to `setEnabled(boolean)`.
`GeoTouchSensorObject`	`setGeoOrigin(GeoOrigin newValue)` Assign GeoOrigin instance (using a properly typed node) (deprecated node, optional) to initializeOnly SFNode field geoOrigin.
`GeoTouchSensorObject`	`setGeoOrigin(ProtoInstanceObject newValue)` Assign ProtoInstance (using a properly typed node) to initializeOnly SFNode field geoOrigin.
`GeoTouchSensorObject`	`setGeoSystem(java.util.ArrayList<java.lang.String> newValue)` Assign ArrayList value of MFString geoSystem field, similar to `setGeoSystem(String[])`.
`GeoTouchSensorObject`	`setGeoSystem(MFStringObject newValue)` Assign typed object value to MFString geoSystem field, similar to `setGeoSystem(String[])`.
`GeoTouchSensorObject`	`setGeoSystem(SFStringObject newValue)` Assign single SFString object value to MFString geoSystem field, similar to `setGeoSystem(String[])`.
`GeoTouchSensorObject`	`setGeoSystem(java.lang.String newValue)` Assign singleton String value to MFString geoSystem field, similar to `setGeoSystem(String[])`.
`GeoTouchSensorObject`	`setGeoSystem(java.lang.String[] newValue)` Assign String array to initializeOnly MFString field named geoSystem.
`GeoTouchSensorObject`	`setIS(ISObject newValue)` Assign field named IS for establishing IS/connect field connections between ProtoInterface fields and internal ProtoBody nodes.
`GeoTouchSensorObject`	`setMetadata(ProtoInstanceObject newValue)` Assign ProtoInstance (using a properly typed node) to inputOutput SFNode field metadata.
`GeoTouchSensorObject`	`setMetadata(X3DMetadataObject newValue)` Assign X3DMetadataObject instance (using a properly typed node) to inputOutput SFNode field metadata.
`GeoTouchSensorObject`	`setUSE(GeoTouchSensorObject DEFnode)` Assign a USE reference to another DEF node of same node type, similar to `setUSE(String)`.
`GeoTouchSensorObject`	`setUSE(SFStringObject newValue)` Assign typed object value to SFString USE field, similar to `setUSE(String)`.
`GeoTouchSensorObject`	`setUSE(java.lang.String newValue)` Assign String value to inputOutput SFString field named USE.
`java.lang.String`	`toStringClassicVRML(int indentLevel)` Recursive method to provide ClassicVRML string serialization.
`java.lang.String`	`toStringVRML97(int indentLevel)` Recursive method to provide VRML97 string serialization.
`java.lang.String`	`toStringX3D(int indentLevel)` Recursive method to provide X3D string serialization of this model subgraph, utilizing XML encoding and conforming to X3D Canonical Form.
`java.lang.String`	`validate()` Recursive method to validate this element plus all contained nodes and statements, using both datatype-specification value checks and regular expression (regex) checking of corresponding string values.

Methods inherited from class org.web3d.x3d.jsail.X3DConcreteNode
getContainerFieldAlternateValues, getContainerFieldOverride, getCssClass, getDEF, getUSE, isNode, isStatement, isUSE, resetContainerFieldOverride, setConcreteCssClass, setConcreteDEF, setConcreteUSE, setContainerFieldOverride

Methods inherited from class org.web3d.x3d.jsail.X3DConcreteElement
clearParentObject, findAncestorElementByName, findAncestorProtoBody, findAncestorSceneObject, findAncestorX3DObject, getPackageName, getParentObject, getValidationResult, hasAncestorElementByName, hasAncestorProtoBody, hasAncestorSceneObject, hasAncestorX3DObject, setParentObject, toStringClassicVRML, toStringVRML97, toStringX3D

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- Field Detail
  - NAME
```
public static final java.lang.String NAME
```
    String constant NAME provides name of this element: GeoTouchSensor.
    
    See Also:
    
    Constant Field Values
  - COMPONENT
```
public static final java.lang.String COMPONENT
```
    String constant COMPONENT defines X3D component for the GeoTouchSensor element: Geospatial
    
    See Also:
    
    Constant Field Values
  - LEVEL
```
public static final int LEVEL
```
    Integer constant LEVEL provides default X3D Geospatial component level for this element: 1
    
    See Also:
    
    Constant Field Values
  - DESCRIPTION_DEFAULT_VALUE
```
public static final java.lang.String DESCRIPTION_DEFAULT_VALUE
```
    SFString field named description has default value equal to an empty string.
    
    See Also:
    
    Constant Field Values
  - ENABLED_DEFAULT_VALUE
```
public static final boolean ENABLED_DEFAULT_VALUE
```
    SFBool field named enabled has default value true (Java syntax) or true (XML syntax).
    
    See Also:
    
    Constant Field Values
  - GEOSYSTEM_DEFAULT_VALUE
```
public static final java.util.ArrayList<java.lang.String> GEOSYSTEM_DEFAULT_VALUE
```
    MFString field named geoSystem has default quoted value new String[] {"GD","WE"} (Java syntax) or quoted value "GD" "WE" (XML syntax).
  - containerField_DEFAULT_VALUE
```
public static final java.lang.String containerField_DEFAULT_VALUE
```
    containerField describes typical field relationship of a node to its parent. Usage is not ordinarily needed when using this API, default value is provided for informational purposes.
    
    See Also:
    
    X3D Scene Authoring Hints: containerField, X3D Unified Object Model (X3DUOM), Constant Field Values
  - fromField_DESCRIPTION
```
public static final java.lang.String fromField_DESCRIPTION
```
    fromField ROUTE name for SFString field named description.
    
    See Also:
    
    Constant Field Values
  - toField_DESCRIPTION
```
public static final java.lang.String toField_DESCRIPTION
```
    toField ROUTE name for SFString field named description.
    
    See Also:
    
    Constant Field Values
  - fromField_ENABLED
```
public static final java.lang.String fromField_ENABLED
```
    fromField ROUTE name for SFBool field named enabled.
    
    See Also:
    
    Constant Field Values
  - toField_ENABLED
```
public static final java.lang.String toField_ENABLED
```
    toField ROUTE name for SFBool field named enabled.
    
    See Also:
    
    Constant Field Values
  - fromField_HITGEOCOORD_CHANGED
```
public static final java.lang.String fromField_HITGEOCOORD_CHANGED
```
    fromField ROUTE name for SFVec3d field named hitGeoCoord_changed.
    
    See Also:
    
    Constant Field Values
  - fromField_HITNORMAL_CHANGED
```
public static final java.lang.String fromField_HITNORMAL_CHANGED
```
    fromField ROUTE name for SFVec3f field named hitNormal_changed.
    
    See Also:
    
    Constant Field Values
  - fromField_HITPOINT_CHANGED
```
public static final java.lang.String fromField_HITPOINT_CHANGED
```
    fromField ROUTE name for SFVec3f field named hitPoint_changed.
    
    See Also:
    
    Constant Field Values
  - fromField_HITTEXCOORD_CHANGED
```
public static final java.lang.String fromField_HITTEXCOORD_CHANGED
```
    fromField ROUTE name for SFVec2f field named hitTexCoord_changed.
    
    See Also:
    
    Constant Field Values
  - fromField_ISACTIVE
```
public static final java.lang.String fromField_ISACTIVE
```
    fromField ROUTE name for SFBool field named isActive.
    
    See Also:
    
    Constant Field Values
  - fromField_ISOVER
```
public static final java.lang.String fromField_ISOVER
```
    fromField ROUTE name for SFBool field named isOver.
    
    See Also:
    
    Constant Field Values
  - fromField_METADATA
```
public static final java.lang.String fromField_METADATA
```
    fromField ROUTE name for SFNode field named metadata.
    
    See Also:
    
    Constant Field Values
  - toField_METADATA
```
public static final java.lang.String toField_METADATA
```
    toField ROUTE name for SFNode field named metadata.
    
    See Also:
    
    Constant Field Values
  - fromField_TOUCHTIME
```
public static final java.lang.String fromField_TOUCHTIME
```
    fromField ROUTE name for SFTime field named touchTime.
    
    See Also:
    
    Constant Field Values
- Constructor Detail
  - GeoTouchSensorObject
```
public GeoTouchSensorObject()
```
    Constructor for GeoTouchSensorObject to initialize member variables with default values.
  - GeoTouchSensorObject
```
public GeoTouchSensorObject(java.lang.String DEFlabel)
```
    Utility constructor that assigns DEF label after initializing member variables with default values.
    
    Parameters:
    
    DEFlabel - unique DEF name for this X3D node
- Method Detail
  - getElementName
```
public final java.lang.String getElementName()
```
    Provides name of this element: GeoTouchSensor
    
    Specified by:
    
    getElementName in class X3DConcreteElement
    
    Returns:
    
    name of this element
  - getComponent
```
public final java.lang.String getComponent()
```
    Defines X3D component for the GeoTouchSensor element: Geospatial
    
    Specified by:
    
    getComponent in class X3DConcreteElement
    
    Returns:
    
    X3D component for this element
  - getComponentLevel
```
public final int getComponentLevel()
```
    Provides default X3D component level for this element: 1
    
    Specified by:
    
    getComponentLevel in class X3DConcreteElement
    
    Returns:
    
    default X3D component level for this element
  - getFieldType
```
public java.lang.String getFieldType(java.lang.String fieldName)
```
    Indicate type corresponding to given fieldName.
    
    Specified by:
    
    getFieldType in class X3DConcreteElement
    
    Parameters:
    
    fieldName - name of field in this X3D node
    
    Returns:
    
    X3D type (SFvec3f etc.), otherwise ConfigurationProperties.ERROR_UNKNOWN_FIELD_TYPE if not recognized
    
    See Also:
    
    ConfigurationProperties.ERROR_UNKNOWN_FIELD_TYPE
  - getAccessType
```
public java.lang.String getAccessType(java.lang.String fieldName)
```
    Indicate accessType corresponding to given fieldName.
    
    Specified by:
    
    getAccessType in class X3DConcreteElement
    
    Parameters:
    
    fieldName - name of field in this X3D node
    
    Returns:
    
    X3D accessType (inputOnly etc.), otherwise ConfigurationProperties.ERROR_UNKNOWN_FIELD_ACCESSTYPE if not recognized
    
    See Also:
    
    ConfigurationProperties.ERROR_UNKNOWN_FIELD_ACCESSTYPE
  - getContainerFieldDefault
```
public final java.lang.String getContainerFieldDefault()
```
    containerField describes typical field relationship of a node to its parent. Usage is not ordinarily needed when using this API, default value is provided for informational purposes.
    
    Specified by:
    
    getContainerFieldDefault in class X3DConcreteNode
    
    Returns:
    
    default containerField value
    
    See Also:
    
    X3D Scene Authoring Hints: containerField, X3D Unified Object Model (X3DUOM)
  - initialize
```
public final void initialize()
```
    Initialize all member variables to default values.
    
    Overrides:
    
    initialize in class X3DConcreteNode
  - getDescription
```
public java.lang.String getDescription()
```
    Provide String value from inputOutput SFString field named description.
    
    Tooltip: Author-provided text tooltip that tells users the expected action of this node.
    - Hint: include space characters since a description is not a DEF identifier. Write short phrases that make descriptions clear and readable.
    - Hint: many XML tools substitute XML character references for special characters automatically if needed within an attribute value (such as & for & ampersand character, or " for " quotation-mark character).
    Specified by:
    
    getDescription in interface GeoTouchSensor
    
    Specified by:
    
    getDescription in interface X3DPointingDeviceSensorNode
    
    Specified by:
    
    getDescription in interface X3DTouchSensorNode
    
    Returns:
    
    value of description field
  - setDescription
```
public GeoTouchSensorObject setDescription(java.lang.String newValue)
```
    Assign String value to inputOutput SFString field named description.
    
    Tooltip: Author-provided text tooltip that tells users the expected action of this node. Hint: include space characters since a description is not a DEF identifier. Write short phrases that make descriptions clear and readable. Hint: many XML tools substitute XML character references for special characters automatically if needed within an attribute value (such as & for & ampersand character, or " for " quotation-mark character).
    
    Specified by:
    
    setDescription in interface GeoTouchSensor
    
    Specified by:
    
    setDescription in interface X3DPointingDeviceSensorNode
    
    Specified by:
    
    setDescription in interface X3DTouchSensorNode
    
    Parameters:
    
    newValue - is new value for the description field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
  - setDescription
```
public GeoTouchSensorObject setDescription(SFStringObject newValue)
```
    Assign typed object value to SFString description field, similar to setDescription(String).
    
    Parameters:
    
    newValue - is new value for the description field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
  - getEnabled
```
public boolean getEnabled()
```
    Provide boolean value from inputOutput SFBool field named enabled.
    
    Tooltip: Enables/disables node operation. *
    
    Specified by:
    
    getEnabled in interface X3DSensorNode
    
    Specified by:
    
    getEnabled in interface GeoTouchSensor
    
    Specified by:
    
    getEnabled in interface X3DPointingDeviceSensorNode
    
    Specified by:
    
    getEnabled in interface X3DTouchSensorNode
    
    Returns:
    
    value of enabled field
  - setEnabled
```
public GeoTouchSensorObject setEnabled(boolean newValue)
```
    Assign boolean value to inputOutput SFBool field named enabled.
    
    Tooltip: Enables/disables node operation.
    
    Specified by:
    
    setEnabled in interface X3DSensorNode
    
    Specified by:
    
    setEnabled in interface GeoTouchSensor
    
    Specified by:
    
    setEnabled in interface X3DPointingDeviceSensorNode
    
    Specified by:
    
    setEnabled in interface X3DTouchSensorNode
    
    Parameters:
    
    newValue - is new value for the enabled field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
  - setEnabled
```
public GeoTouchSensorObject setEnabled(SFBoolObject newValue)
```
    Assign typed object value to SFBool enabled field, similar to setEnabled(boolean).
    
    Parameters:
    
    newValue - is new value for the enabled field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
  - getGeoOrigin
```
public GeoOrigin getGeoOrigin()
```
    Provide GeoOrigin instance (using a properly typed node) (deprecated node, optional) from initializeOnly SFNode field geoOrigin.
    
    Specified by:
    
    getGeoOrigin in interface GeoTouchSensor
    
    Returns:
    
    value of geoOrigin field
    
    See Also:
    
    getGeoOriginProtoInstance()
  - setGeoOrigin
```
public GeoTouchSensorObject setGeoOrigin(GeoOrigin newValue)
```
    Assign GeoOrigin instance (using a properly typed node) (deprecated node, optional) to initializeOnly SFNode field geoOrigin.
    
    Specified by:
    
    setGeoOrigin in interface GeoTouchSensor
    
    Parameters:
    
    newValue - is new value for the geoOrigin field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
    
    See Also:
    
    setGeoOrigin(ProtoInstanceObject)
  - clearGeoOrigin
```
public GeoTouchSensorObject clearGeoOrigin()
```
    Utility method to clear SFNode value of geoOrigin field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive setAttribute method invocations).
  - setGeoOrigin
```
public GeoTouchSensorObject setGeoOrigin(ProtoInstanceObject newValue)
```
    Assign ProtoInstance (using a properly typed node) to initializeOnly SFNode field geoOrigin.
    
    Parameters:
    
    newValue - is new value for the geoOrigin field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
    
    See Also:
    
    setGeoOrigin(GeoOrigin)
  - hasGeoOrigin
```
public boolean hasGeoOrigin()
```
    Indicate whether an object is available for initializeOnly SFNode field geoOrigin.
    
    Returns:
    
    whether a properly typed node or ProtoInstance or CommentsBlock is available.
    
    See Also:
    
    getGeoOrigin(), getGeoOriginProtoInstance()
  - getGeoSystem
```
public java.lang.String[] getGeoSystem()
```
    Provide array of String results from initializeOnly MFString field named geoSystem.
    
    Tooltip: Identifies spatial reference frame: Geodetic (G D), Geocentric (GC), Universal Transverse Mercator (UTM). Supported values: "GD" "UTM" or "GC" followed by additional quoted string parameters as appropriate for the type.
    - Hint: X3D Architecture 25.2.2 Spatial reference frames
      http://www.web3d.org/documents/specifications/19775-1/V3.3/Part01/components/geodata.html#Spatialreferenceframes
    - Hint: X3D Architecture 25.2.4 Specifying geospatial coordinates
      http://www.web3d.org/documents/specifications/19775-1/V3.3/Part01/components/geodata.html#Specifyinggeospatialcoords
    - Hint: UTM is Universal Transverse Mercator coordinate system
      https://en.wikipedia.org/wiki/Universal_Transverse_Mercator_coordinate_system
    - Warning: deprecated values are GDC (replaced by GD) and GCC (replaced by GC).
    Specified by:
    
    getGeoSystem in interface GeoTouchSensor
    
    Returns:
    
    value of geoSystem field
  - getGeoSystemList
```
public java.util.ArrayList<java.lang.String> getGeoSystemList()
```
    Utility method to get ArrayList value of MFString geoSystem field, similar to getGeoSystem().
    
    Returns:
    
    value of geoSystem field
  - setGeoSystem
```
public GeoTouchSensorObject setGeoSystem(java.lang.String[] newValue)
```
    Assign String array to initializeOnly MFString field named geoSystem.
    
    Tooltip: Identifies spatial reference frame: Geodetic (G D), Geocentric (GC), Universal Transverse Mercator (UTM). Supported values: "GD" "UTM" or "GC" followed by additional quoted string parameters as appropriate for the type. Hint: X3D Architecture 25.2.2 Spatial reference frames http://www.web3d.org/documents/specifications/19775-1/V3.3/Part01/components/geodata.html#Spatialreferenceframes Hint: X3D Architecture 25.2.4 Specifying geospatial coordinates http://www.web3d.org/documents/specifications/19775-1/V3.3/Part01/components/geodata.html#Specifyinggeospatialcoords Hint: UTM is Universal Transverse Mercator coordinate system https://en.wikipedia.org/wiki/Universal_Transverse_Mercator_coordinate_system Warning: deprecated values are GDC (replaced by GD) and GCC (replaced by GC).
    
    Specified by:
    
    setGeoSystem in interface GeoTouchSensor
    
    Parameters:
    
    newValue - is new value for the geoSystem field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
  - setGeoSystem
```
public GeoTouchSensorObject setGeoSystem(MFStringObject newValue)
```
    Assign typed object value to MFString geoSystem field, similar to setGeoSystem(String[]).
    
    Parameters:
    
    newValue - is new value for the geoSystem field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
  - setGeoSystem
```
public GeoTouchSensorObject setGeoSystem(SFStringObject newValue)
```
    Assign single SFString object value to MFString geoSystem field, similar to setGeoSystem(String[]).
    
    Parameters:
    
    newValue - is new value for the geoSystem field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
  - setGeoSystem
```
public GeoTouchSensorObject setGeoSystem(java.lang.String newValue)
```
    Assign singleton String value to MFString geoSystem field, similar to setGeoSystem(String[]).
    
    Parameters:
    
    newValue - is new value for the geoSystem field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
  - setGeoSystem
```
public GeoTouchSensorObject setGeoSystem(java.util.ArrayList<java.lang.String> newValue)
```
    Assign ArrayList value of MFString geoSystem field, similar to setGeoSystem(String[]).
    
    Parameters:
    
    newValue - is new value for the geoSystem field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
  - clearGeoSystem
```
public GeoTouchSensorObject clearGeoSystem()
```
    Utility method to clear MFString value of geoSystem field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive setAttribute method invocations).
  - addGeoSystem
```
public GeoTouchSensorObject addGeoSystem(java.lang.String newValue)
```
    Add singleton String value to MFString geoSystem field.
    
    Parameters:
    
    newValue - is new value to add to the geoSystem field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
    
    See Also:
    
    MFStringObject.cleanupEnumerationValues(String)
  - addGeoSystem
```
public GeoTouchSensorObject addGeoSystem(SFStringObject newValue)
```
    Add singleton SFStringObject value to MFString geoSystem field.
    
    Parameters:
    
    newValue - is new value to add to the geoSystem field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
    
    See Also:
    
    MFStringObject.cleanupEnumerationValues(String)
  - getHitGeoCoord
```
public double[] getHitGeoCoord()
```
    Provide array of 3-tuple double results from outputOnly SFVec3d field named hitGeoCoord_changed.
    
    Tooltip: Output event containing 3D point on surface of underlying geometry, given in GeoTouchSensor's local coordinate system.
    - Warning: it is an error to define this transient outputOnly field in an X3D file.
    Specified by:
    
    getHitGeoCoord in interface GeoTouchSensor
    
    Returns:
    
    value of hitGeoCoord_changed field
  - getHitNormal
```
public float[] getHitNormal()
```
    Provide array of 3-tuple float results from outputOnly SFVec3f field named hitNormal_changed.
    
    Tooltip: Output event containing surface normal vector at the hitGeoCoordinate.
    - Warning: it is an error to define this transient outputOnly field in an X3D file.
    Specified by:
    
    getHitNormal in interface GeoTouchSensor
    
    Returns:
    
    value of hitNormal_changed field
  - getHitPoint
```
public float[] getHitPoint()
```
    Provide array of 3-tuple float results from outputOnly SFVec3f field named hitPoint_changed.
    
    Tooltip: Output event containing 3D point on surface of underlying geometry, given in geometry coordinates (not geographic coordinates).
    - Warning: it is an error to define this transient outputOnly field in an X3D file.
    Specified by:
    
    getHitPoint in interface GeoTouchSensor
    
    Returns:
    
    value of hitPoint_changed field
  - getHitTexCoord
```
public float[] getHitTexCoord()
```
    Provide array of 2-tuple float results from outputOnly SFVec2f field named hitTexCoord_changed.
    
    Tooltip: Output event containing texture coordinates of surface at the hitGeoCoordinate.
    - Warning: it is an error to define this transient outputOnly field in an X3D file.
    Specified by:
    
    getHitTexCoord in interface GeoTouchSensor
    
    Returns:
    
    value of hitTexCoord_changed field
  - getIsActive
```
public boolean getIsActive()
```
    Provide boolean value from outputOnly SFBool field named isActive.
    
    Tooltip: Select geometry by activating the pointing device (e.g. clicking the mouse) to generate isActive events. Output event isActive=true is sent when geometry is selected (e.g. when primary mouse button is pressed), output event isActive=false is sent when geometry is deselected (e.g. when primary mouse button is released).
    - Warning: it is an error to define this transient outputOnly field in an X3D file.
    Specified by:
    
    getIsActive in interface X3DSensorNode
    
    Specified by:
    
    getIsActive in interface GeoTouchSensor
    
    Specified by:
    
    getIsActive in interface X3DPointingDeviceSensorNode
    
    Specified by:
    
    getIsActive in interface X3DTouchSensorNode
    
    Returns:
    
    value of isActive field
  - getIsOver
```
public boolean getIsOver()
```
    Provide boolean value from outputOnly SFBool field named isOver.
    
    Tooltip: Is pointing device over sensor's geometry?.
    - Warning: it is an error to define this transient outputOnly field in an X3D file.
    Specified by:
    
    getIsOver in interface GeoTouchSensor
    
    Specified by:
    
    getIsOver in interface X3DPointingDeviceSensorNode
    
    Specified by:
    
    getIsOver in interface X3DTouchSensorNode
    
    Returns:
    
    value of isOver field
  - getMetadata
```
public X3DMetadataObject getMetadata()
```
    Provide X3DMetadataObject instance (using a properly typed node) from inputOutput SFNode field metadata.
    
    Specified by:
    
    getMetadata in interface X3DChildNode
    
    Specified by:
    
    getMetadata in interface X3DNode
    
    Specified by:
    
    getMetadata in interface X3DSensorNode
    
    Specified by:
    
    getMetadata in interface GeoTouchSensor
    
    Specified by:
    
    getMetadata in interface X3DPointingDeviceSensorNode
    
    Specified by:
    
    getMetadata in interface X3DTouchSensorNode
    
    Returns:
    
    value of metadata field
    
    See Also:
    
    getMetadataProtoInstance(), X3D Scene Authoring Hints: Metadata Nodes
  - setMetadata
```
public GeoTouchSensorObject setMetadata(X3DMetadataObject newValue)
```
    Assign X3DMetadataObject instance (using a properly typed node) to inputOutput SFNode field metadata.
    
    Specified by:
    
    setMetadata in interface X3DChildNode
    
    Specified by:
    
    setMetadata in interface X3DNode
    
    Specified by:
    
    setMetadata in interface X3DSensorNode
    
    Specified by:
    
    setMetadata in interface GeoTouchSensor
    
    Specified by:
    
    setMetadata in interface X3DPointingDeviceSensorNode
    
    Specified by:
    
    setMetadata in interface X3DTouchSensorNode
    
    Specified by:
    
    setMetadata in class X3DConcreteNode
    
    Parameters:
    
    newValue - is new value for the metadata field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
    
    See Also:
    
    setMetadata(ProtoInstanceObject), X3D Scene Authoring Hints: Metadata Nodes
  - clearMetadata
```
public GeoTouchSensorObject clearMetadata()
```
    Utility method to clear SFNode value of metadata field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive setAttribute method invocations).
  - setMetadata
```
public GeoTouchSensorObject setMetadata(ProtoInstanceObject newValue)
```
    Assign ProtoInstance (using a properly typed node) to inputOutput SFNode field metadata.
    
    Specified by:
    
    setMetadata in class X3DConcreteNode
    
    Parameters:
    
    newValue - is new value for the metadata field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
    
    See Also:
    
    setMetadata(X3DMetadataObject)
  - hasMetadata
```
public boolean hasMetadata()
```
    Indicate whether an object is available for inputOutput SFNode field metadata.
    
    Returns:
    
    whether a properly typed node or ProtoInstance or CommentsBlock is available.
    
    See Also:
    
    getMetadata(), getMetadataProtoInstance(), X3D Scene Authoring Hints: Metadata Nodes
  - getTouchTime
```
public double getTouchTime()
```
    Provide double value in seconds from outputOnly SFTime field named touchTime.
    
    Tooltip: Time event generated when touched.
    - Hint: touchTime event is generated when following three conditions are all met: (a) pointing device was pointing towards geometry when initially activated (isActive=true), (b) pointing device is currently pointing towards the geometry (isOver=true), and (c) pointing device selection is deactivated/deselected by user (isActive=false event is also generated).
    - Warning: it is an error to define this transient outputOnly field in an X3D file.
    Specified by:
    
    getTouchTime in interface GeoTouchSensor
    
    Specified by:
    
    getTouchTime in interface X3DTouchSensorNode
    
    Returns:
    
    value of touchTime field
  - setDEF
```
public final GeoTouchSensorObject setDEF(java.lang.String newValue)
```
    Assign String value to inputOutput SFString field named DEF.
    
    Tooltip: DEF defines a unique ID name for this node, referenceable by other nodes. Hint: descriptive DEF names improve clarity and help document a model. Hint: well-defined names can simplify design and debugging through improved author understanding. Hint: X3D Scene Authoring Hints, Naming Conventions http://www.web3d.org/x3d/content/examples/X3dSceneAuthoringHints.html#NamingConventions
    
    Note that setting the DEF value clears the USE value.
    
    Specified by:
    
    setDEF in interface X3DChildNode
    
    Specified by:
    
    setDEF in interface X3DNode
    
    Specified by:
    
    setDEF in interface X3DSensorNode
    
    Specified by:
    
    setDEF in interface GeoTouchSensor
    
    Specified by:
    
    setDEF in interface X3DPointingDeviceSensorNode
    
    Specified by:
    
    setDEF in interface X3DTouchSensorNode
    
    Specified by:
    
    setDEF in class X3DConcreteNode
    
    Parameters:
    
    newValue - is new value for the DEF field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
  - setDEF
```
public GeoTouchSensorObject setDEF(SFStringObject newValue)
```
    Assign typed object value to SFString DEF field, similar to setDEF(String).
    
    Parameters:
    
    newValue - is new value for the DEF field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
  - setUSE
```
public final GeoTouchSensorObject setUSE(java.lang.String newValue)
```
    Assign String value to inputOutput SFString field named USE.
    
    Tooltip: USE means reuse an already DEF-ed node ID, excluding all child nodes and all other attributes (except for containerField, which can have a different value). Hint: USE references to previously defined DEF geometry (instead of duplicating nodes) can improve performance. Warning: do NOT include any child nodes, a DEF attribute, or any other attribute values (except for containerField) when defining a USE attribute. Warning: each USE value must match a corresponding DEF value that is defined earlier in the scene.
    
    Note: each USE node is still an independent object, with the USE value matching the DEF value in the preceding object.
    
    Warning: invoking the setUSE() method on this node resets all other fields to their default values (except for containerField) and also releases all child nodes.
    
    Warning: no other operations can be performed to modify a USE node other than setting an alternate containerField value.
    
    Specified by:
    
    setUSE in interface X3DChildNode
    
    Specified by:
    
    setUSE in interface X3DNode
    
    Specified by:
    
    setUSE in interface X3DSensorNode
    
    Specified by:
    
    setUSE in interface GeoTouchSensor
    
    Specified by:
    
    setUSE in interface X3DPointingDeviceSensorNode
    
    Specified by:
    
    setUSE in interface X3DTouchSensorNode
    
    Specified by:
    
    setUSE in class X3DConcreteNode
    
    Parameters:
    
    newValue - is new value for the USE field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
  - setUSE
```
public GeoTouchSensorObject setUSE(SFStringObject newValue)
```
    Assign typed object value to SFString USE field, similar to setUSE(String).
    
    Parameters:
    
    newValue - is new value for the USE field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
  - setCssClass
```
public final GeoTouchSensorObject setCssClass(java.lang.String newValue)
```
    Assign String value to inputOutput SFString field named class.
    
    Tooltip: The class attribute is a space-separated list of classes, reserved for use by CSS cascading stylesheets. Warning: currently the class attribute is only supported in XML encoding of X3D scenes. Hint: W3C Cascading Style Sheets https://www.w3.org/Style/CSS
    
    Specified by:
    
    setCssClass in interface X3DChildNode
    
    Specified by:
    
    setCssClass in interface X3DNode
    
    Specified by:
    
    setCssClass in interface X3DSensorNode
    
    Specified by:
    
    setCssClass in interface GeoTouchSensor
    
    Specified by:
    
    setCssClass in interface X3DPointingDeviceSensorNode
    
    Specified by:
    
    setCssClass in interface X3DTouchSensorNode
    
    Specified by:
    
    setCssClass in class X3DConcreteNode
    
    Parameters:
    
    newValue - is new value for the class field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
    
    See Also:
    
    W3C Cascading Style Sheets
  - setCssClass
```
public GeoTouchSensorObject setCssClass(SFStringObject newValue)
```
    Assign typed object value to SFString cssClass field, similar to setCssClass(String).
    
    Parameters:
    
    newValue - is new value for the class field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
  - setIS
```
public GeoTouchSensorObject setIS(ISObject newValue)
```
    Assign field named IS for establishing IS/connect field connections between ProtoInterface fields and internal ProtoBody nodes. The IS statement connects node fields defined inside a ProtoBody declaration back to corresponding ProtoInterface fields.
    
    Specified by:
    
    setIS in class X3DConcreteNode
    
    Parameters:
    
    newValue - is new value for the description field.
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
    
    See Also:
    
    X3D Tooltips: IS, X3D Tooltips: connect
  - getIS
```
public ISObject getIS()
```
    Provide field named IS for establishing IS/connect field connections between ProtoInterface fields and internal ProtoBody nodes. The IS statement connects node fields defined inside a ProtoBody declaration back to corresponding ProtoInterface fields.
    
    Specified by:
    
    getIS in class X3DConcreteNode
    
    Returns:
    
    current ISObject, if any.
    
    See Also:
    
    X3D Tooltips: IS, X3D Tooltips: connect
  - setUSE
```
public GeoTouchSensorObject setUSE(GeoTouchSensorObject DEFnode)
```
    Assign a USE reference to another DEF node of same node type, similar to setUSE(String).
    
    Warning: note that the setUSE() method on this node resets all other fields to their default values (except for containerField) and also releases all child nodes.
    
    Warning: no other operations can be performed to modify a USE node other than setting an alternate containerField value.
    
    Parameters:
    
    DEFnode - must have a DEF value defined
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
  - addComments
```
public GeoTouchSensorObject addComments(java.lang.String newComment)
```
    Add comment as String to contained commentsList.
    
    Specified by:
    
    addComments in class X3DConcreteElement
    
    Parameters:
    
    newComment - initial value
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive setAttribute method invocations).
  - addComments
```
public GeoTouchSensorObject addComments(java.lang.String[] newComments)
```
    Add comments as String[] array to contained commentsList.
    
    Specified by:
    
    addComments in class X3DConcreteElement
    
    Parameters:
    
    newComments - array of comments
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive setAttribute method invocations).
  - addComments
```
public GeoTouchSensorObject addComments(CommentsBlock newCommentsBlock)
```
    Add CommentsBlock to contained commentsList.
    
    Specified by:
    
    addComments in class X3DConcreteElement
    
    Parameters:
    
    newCommentsBlock - block of comments to add
    
    Returns:
    
    GeoTouchSensorObject - namely this same object to allow sequential method pipelining (i.e. consecutive setAttribute method invocations).
  - toStringX3D
```
public java.lang.String toStringX3D(int indentLevel)
```
    Recursive method to provide X3D string serialization of this model subgraph, utilizing XML encoding and conforming to X3D Canonical Form.
    
    Specified by:
    
    toStringX3D in class X3DConcreteElement
    
    Parameters:
    
    indentLevel - number of levels of indentation for this element
    
    Returns:
    
    X3D string
    
    See Also:
    
    X3DObject.FILE_EXTENSION_X3D, X3DObject.FILE_EXTENSION_XML, X3DObject.toStringXML(), X3DObject.toFileXML(String), X3DObject.toFileX3D(String), X3D XML Encoding, X3D Compressed Binary Encoding: X3D Canonical Form
  - toStringClassicVRML
```
public java.lang.String toStringClassicVRML(int indentLevel)
```
    Recursive method to provide ClassicVRML string serialization.
    
    Specified by:
    
    toStringClassicVRML in class X3DConcreteElement
    
    Parameters:
    
    indentLevel - number of levels of indentation for this element
    
    Returns:
    
    ClassicVRML string
    
    See Also:
    
    X3DObject.FILE_EXTENSION_CLASSICVRML, X3D Resources: Virtual Reality Modeling Language (VRML) 97, Extensible 3D (X3D) encodings Part 2: Classic VRML encoding, Extensible 3D (X3D) encodings Part 2: Classic VRML encoding, Annex A: Grammar
  - toStringVRML97
```
public java.lang.String toStringVRML97(int indentLevel)
```
    Recursive method to provide VRML97 string serialization.
    
    Specified by:
    
    toStringVRML97 in class X3DConcreteElement
    
    Parameters:
    
    indentLevel - number of levels of indentation for this element
    
    Returns:
    
    VRML97 string
    
    See Also:
    
    X3DObject.FILE_EXTENSION_VRML97, X3D Resources: Virtual Reality Modeling Language (VRML) 97, Virtual Reality Modeling Language (VRML) 97 specification, VRML 97 v2.1 Amendment
  - findElementByNameValue
```
public X3DConcreteElement findElementByNameValue(java.lang.String nameValue)
```
    Recursive method to provide object reference to node or statement by name attribute, if found as part of this element or in a contained element. Elements with name fields include meta, Metadata* nodes, field/fieldValue, ProtoDeclare/ExternProtoDeclare/ProtoInstance, CAD and HAnim nodes.
    
    Warning: first start with findAncestorSceneObject() to check entire scene graph, or findAncestorX3DObject() to check entire model document.
    
    Warning: more than one element may be found that has the same name, this method does not handle that case.
    
    Specified by:
    
    findElementByNameValue in class X3DConcreteElement
    
    Parameters:
    
    nameValue - is value of the name field being searched for in this element and child elements(if any)
    
    Returns:
    
    object reference to found element, null otherwise
    
    See Also:
    
    findNodeByDEF(String), X3DConcreteElement.hasAncestorSceneObject(), X3DConcreteElement.findAncestorX3DObject()
  - findElementByNameValue
```
public X3DConcreteElement findElementByNameValue(java.lang.String nameValue,
                                                 java.lang.String elementName)
```
    Recursive method to provide object reference to node or statement by name attribute, if found as part of this element or in a contained element. Elements with name fields include meta, Metadata* nodes, field/fieldValue, ProtoDeclare/ExternProtoDeclare/ProtoInstance, CAD and HAnim nodes.
    
    Warning: first start with findAncestorSceneObject() to check entire scene graph, or findAncestorX3DObject() to check entire model document.
    
    Warning: more than one element may be found that has the same name, this method does not handle that case.
    
    Specified by:
    
    findElementByNameValue in class X3DConcreteElement
    
    Parameters:
    
    nameValue - is value of the name field being searched for in this element and child elements(if any)
    
    elementName - identifies the element of interest (meta MetadataString ProtoDeclare CADassembly ProtoInstance HAnimHumanoid etc.)
    
    Returns:
    
    object reference to found element, null otherwise
    
    See Also:
    
    findNodeByDEF(String), X3DConcreteElement.hasAncestorSceneObject(), X3DConcreteElement.findAncestorX3DObject()
  - hasElementByNameValue
```
public boolean hasElementByNameValue(java.lang.String nameValue,
                                     java.lang.String elementName)
```
    Recursive method to determine whether node or statement with given name attribute is found, meaning both objects are attached to same scene graph.
    
    Parameters:
    
    nameValue - is value of the name field being searched for in this element and child elements(if any)
    
    elementName - identifies the element of interest (meta MetadataString ProtoDeclare CADassembly ProtoInstance HAnimHumanoid etc.)
    
    Returns:
    
    whether node is found
    
    See Also:
    
    findElementByNameValue(String, String)
  - findNodeByDEF
```
public X3DConcreteNode findNodeByDEF(java.lang.String DEFvalue)
```
    Recursive method to provide object reference to node by DEF, if found as this node or in a contained node.
    
    Warning: first start with findAncestorSceneObject() to check entire scene graph, or findAncestorX3DObject() to check entire model document.
    
    Warning: more than one element may be found that has the same DEF, this method does not handle that case.
    
    Specified by:
    
    findNodeByDEF in class X3DConcreteElement
    
    Parameters:
    
    DEFvalue - is value of the name field being searched for in this element and child elements(if any)
    
    Returns:
    
    object reference to found node, null otherwise
    
    See Also:
    
    findElementByNameValue(String), X3DConcreteElement.hasAncestorSceneObject(), X3DConcreteElement.findAncestorX3DObject()
  - hasNodeByDEF
```
public boolean hasNodeByDEF(java.lang.String DEFvalue)
```
    Recursive method to determine whether node with DEFvalue is found, meaning both objects are attached to same scene graph.
    
    Parameters:
    
    DEFvalue - is value of the name field being searched for in this element and child elements(if any)
    
    Returns:
    
    whether node is found
    
    See Also:
    
    findNodeByDEF(String)
  - validate
```
public java.lang.String validate()
```
    Recursive method to validate this element plus all contained nodes and statements, using both datatype-specification value checks and regular expression (regex) checking of corresponding string values.
    
    Specified by:
    
    validate in class X3DConcreteElement
    
    Returns:
    
    validation results (if any)

Class GeoTouchSensorObject

Field Summary

Fields inherited from class org.web3d.x3d.jsail.X3DConcreteNode

Fields inherited from class org.web3d.x3d.jsail.X3DConcreteElement

Constructor Summary

Method Summary

Methods inherited from class org.web3d.x3d.jsail.X3DConcreteNode

Methods inherited from class org.web3d.x3d.jsail.X3DConcreteElement

Methods inherited from class java.lang.Object

Field Detail

NAME

COMPONENT

LEVEL

DESCRIPTION_DEFAULT_VALUE

ENABLED_DEFAULT_VALUE

GEOSYSTEM_DEFAULT_VALUE

containerField_DEFAULT_VALUE

fromField_DESCRIPTION

toField_DESCRIPTION

fromField_ENABLED

toField_ENABLED

fromField_HITGEOCOORD_CHANGED

fromField_HITNORMAL_CHANGED

fromField_HITPOINT_CHANGED

fromField_HITTEXCOORD_CHANGED

fromField_ISACTIVE

fromField_ISOVER

fromField_METADATA

toField_METADATA

fromField_TOUCHTIME

Constructor Detail

GeoTouchSensorObject

GeoTouchSensorObject

Method Detail

getElementName

getComponent

getComponentLevel

getFieldType

getAccessType

getContainerFieldDefault

initialize

getDescription

setDescription

setDescription

getEnabled

setEnabled

setEnabled

getGeoOrigin

setGeoOrigin

clearGeoOrigin

setGeoOrigin

hasGeoOrigin

getGeoSystem

getGeoSystemList

setGeoSystem

setGeoSystem

setGeoSystem

setGeoSystem

setGeoSystem

clearGeoSystem

addGeoSystem

addGeoSystem

getHitGeoCoord

getHitNormal

getHitPoint

getHitTexCoord

getIsActive

getIsOver

getMetadata

setMetadata

clearMetadata

setMetadata

hasMetadata

getTouchTime

setDEF

setDEF

setUSE

setUSE

setCssClass

setCssClass