package Basic.X3dSpecifications;
/*
Copyright (c) 1995-2023 held by the author(s). All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer
in the documentation and/or other materials provided with the
distribution.
* Neither the name of the Web3D Consortium (https://www.web3d.org)
nor the names of its contributors may be used to endorse or
promote products derived from this software without specific
prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
*/
import org.web3d.x3d.jsail.Core.*;
import org.web3d.x3d.jsail.EnvironmentalEffects.*;
import org.web3d.x3d.jsail.fields.*;
import org.web3d.x3d.jsail.Geometry3D.*;
import org.web3d.x3d.jsail.Grouping.*;
import org.web3d.x3d.jsail.Navigation.*;
import org.web3d.x3d.jsail.Rendering.*;
import org.web3d.x3d.jsail.Shape.*;
import org.web3d.x3d.jsail.Text.*;
// Javadoc metadata annotations follow, see below for X3DJSAIL Java source code.
/**
*
X3D Extrusion spine-aligned cross-section plane (SCP) at a spine point. Modeled after Figure 13.5 in X3D Specification.
Related links: ExtrusionFigureX3dSpecification.java source, ExtrusionFigureX3dSpecification catalog page, X3D Resources, X3D Scene Authoring Hints, and X3D Tooltips.
This program uses the
X3D Java Scene Access Interface Library (X3DJSAIL).
It has been produced using the
X3dToJava.xslt
stylesheet
(version control)
is used to create Java source code from an original .x3d
model.
* @author Al Shaffer
*/
public class ExtrusionFigureX3dSpecification
{
/** Default constructor to create this object. */
public ExtrusionFigureX3dSpecification ()
{
initialize();
}
/** Create and initialize the X3D model for this object. */
public final void initialize()
{
try { // catch-all
x3dModel = new X3D().setProfile(X3D.PROFILE_IMMERSIVE).setVersion(X3D.VERSION_3_3)
.setHead(new head()
.addMeta(new meta().setName(meta.NAME_TITLE ).setContent("ExtrusionFigureX3dSpecification.x3d"))
.addMeta(new meta().setName(meta.NAME_DESCRIPTION).setContent("X3D Extrusion spine-aligned cross-section plane (SCP) at a spine point. Modeled after Figure 13.5 in X3D Specification."))
.addMeta(new meta().setName(meta.NAME_CREATOR ).setContent("Al Shaffer"))
.addMeta(new meta().setName(meta.NAME_CREATED ).setContent("4 February 2005"))
.addMeta(new meta().setName(meta.NAME_MODIFIED ).setContent("28 October 2019"))
.addMeta(new meta().setName(meta.NAME_IMAGE ).setContent("Extrusion.gif"))
.addMeta(new meta().setName(meta.NAME_SPECIFICATIONSECTION).setContent("X3D encodings, ISO/IEC 19776-1.3, Part 1: XML encoding, Figure 13.5 - Spine-aligned cross-section plane at a spine point."))
.addMeta(new meta().setName(meta.NAME_SPECIFICATIONURL).setContent("https://www.web3d.org/specifications/X3Dv4Draft/ISO-IEC19775-1v4-IS.proof/Part01/components/geometry3D.html#f-Spine-alignedcross-section"))
.addMeta(new meta().setName(meta.NAME_IDENTIFIER ).setContent("https://www.web3d.org/x3d/content/examples/Basic/X3dSpecifications/ExtrusionFigureX3dSpecification.x3d"))
.addMeta(new meta().setName(meta.NAME_GENERATOR ).setContent("X3D-Edit 3.3, https://savage.nps.edu/X3D-Edit"))
.addMeta(new meta().setName(meta.NAME_LICENSE ).setContent("../license.html")))
.setScene(new Scene()
.addChild(new WorldInfo().setTitle("ExtrusionFigureX3dSpecification.x3d"))
.addChild(new Background().setGroundColor(new MFColor(new double[] {1.0,1.0,1.0})).setSkyColor(new MFColor(new double[] {1.0,1.0,1.0})))
.addChild(new Viewpoint().setDescription("X3D Specification Figure 13.5, Extrusion Spine-aligned Cross-section Plane (SCP)").setOrientation(1.0,0.0,0.0,-0.43).setPosition(-0.5,5.5,12.0))
.addChild(new Viewpoint().setDescription("Front view, Spine-aligned Cross-section Plane (SCP)").setPosition(0.0,0.0,14.0))
.addChild(new Viewpoint().setDescription("Overhead view, Spine-aligned Cross-section Plane (SCP)").setOrientation(1.0,0.0,0.0,-1.428899).setPosition(0.0,14.0,2.0))
.addChild(new Transform()
.addComments(" Draw partial coordinate axis. Code derived from CoordinateAxes.x3d by Don Brutzman, 21 January 2002 ")
.addChild(new Transform("HALF_COORD_AXIS")
.addChild(new Group()
.addComments(" Vertical Y arrow and labels ")
.addChild(new Group("ARROW")
.addChild(new Transform().setTranslation(0.0,1.0,0.0)
.addChild(new Shape()
.setAppearance(new Appearance("ARROW_APPEARANCE")
.setMaterial(new Material().setDiffuseColor(0.0,1.0,.7)))
.setGeometry(new Cylinder().setBottom(false).setRadius(.05).setTop(false))))
.addChild(new Transform().setTranslation(0.0,2.0,0.0)
.addChild(new Shape("ARROW_POINTER")
.setGeometry(new Cone().setBottomRadius(.16).setHeight(.4))
.setAppearance(new Appearance().setUSE("ARROW_APPEARANCE")))))
.addChild(new Transform().setTranslation(0.15,2.1,0.15)
.addChild(new Billboard().setAxisOfRotation(0.0,0.0,0.0)
.addChild(new Shape()
.setAppearance(new Appearance("LABEL_APPEARANCE")
.setMaterial(new Material().setDiffuseColor(0.0,0.0,0.0)))
.setGeometry(new Text().setString(new String[] {"+Y axis"})
.setFontStyle(new FontStyle("LABEL_FONT").setFamily(new String[] {"SANS"}).setJustify(FontStyle.JUSTIFY_BEGIN_END).setSize(.4).setCssStyle("ITALIC")))))))
.addChild(new Transform().setRotation(0.0,0.0,1.0,-1.57079)
.addComments(" Horizontal X arrow and label ")
.addChild(new Group()
.addChild(new Group().setUSE("ARROW"))
.addChild(new Transform().setRotation(0.0,0.0,1.0,1.57079).setTranslation(-0.15,2.1,0.15)
.addChild(new Billboard().setAxisOfRotation(0.0,0.0,0.0)
.addChild(new Shape()
.setAppearance(new Appearance().setUSE("LABEL_APPEARANCE"))
.setGeometry(new Text().setString(new String[] {"+X axis"})
.setFontStyle(new FontStyle().setUSE("LABEL_FONT"))))))))
.addChild(new Transform().setRotation(1.0,0.0,0.0,1.57079)
.addComments(" Perpendicular Z arrow and label ")
.addChild(new Group()
.addChild(new Group().setUSE("ARROW"))
.addChild(new Transform().setRotation(1.0,0.0,0.0,-1.57079).setTranslation(0.15,2.1,-0.15)
.addChild(new Billboard().setAxisOfRotation(0.0,0.0,0.0)
.addChild(new Shape()
.setAppearance(new Appearance().setUSE("LABEL_APPEARANCE"))
.setGeometry(new Text().setString(new String[] {"+Z axis"})
.setFontStyle(new FontStyle().setUSE("LABEL_FONT")))))))))
.addComments(" Draw spine-aligned cross-section plane at a spine point ")
.addChild(new Transform("SPINE_CROSS_SECTION")
.addChild(new Group()
.addComments(" Draw sphere and label at center of coordinate axis ")
.addChild(new Group()
.addChild(new Transform()
.addChild(new Shape("DARK_GRAY_SPHERE")
.setGeometry(new Sphere().setRadius(0.3))
.setAppearance(new Appearance("DARK_GRAY")
.setMaterial(new Material().setDiffuseColor(0.15,0.15,0.15)))))
.addChild(new Transform().setTranslation(-1.0,0.0,0.0)
.addChild(new Billboard().setAxisOfRotation(0.0,0.0,0.0)
.addChild(new Shape()
.setAppearance(new Appearance().setUSE("LABEL_APPEARANCE"))
.setGeometry(new Text().setString(new String[] {"spine[i]"})
.setFontStyle(new FontStyle("LABEL_FONT2").setFamily(new String[] {"SANS"}).setJustify(FontStyle.JUSTIFY_MIDDLE_MIDDLE).setSize(0.4).setCssStyle("ITALIC")))))))
.addComments(" Draw spine rods ")
.addChild(new Group()
.addChild(new Transform().setRotation(0.0,0.0,1.0,0.64)
.addChild(new Transform().setTranslation(0.0,2.5,0.0)
.addChild(new Shape("RED_ROD")
.setGeometry(new Cylinder().setBottom(false).setHeight(5.0).setRadius(0.08).setTop(false))
.setAppearance(new Appearance()
.setMaterial(new Material().setDiffuseColor(0.82,0.13,0.56))))))
.addChild(new Transform().setRotation(0.0,0.0,1.0,-0.64)
.addChild(new Transform().setTranslation(0.0,-2.5,0.0)
.addChild(new Shape().setUSE("RED_ROD")))))
.addComments(" Draw two spheres and labels at ends of spines ")
.addChild(new Group()
.addChild(new Transform().setTranslation(-3.0,4.0,0.0)
.addChild(new Shape().setUSE("DARK_GRAY_SPHERE"))
.addChild(new Transform().setTranslation(0.0,0.7,0.0)
.addChild(new Billboard().setAxisOfRotation(0.0,0.0,0.0)
.addChild(new Shape()
.setAppearance(new Appearance().setUSE("LABEL_APPEARANCE"))
.setGeometry(new Text().setString(new String[] {"spine[i+1]"})
.setFontStyle(new FontStyle().setUSE("LABEL_FONT2")))))))
.addChild(new Transform().setTranslation(-3.0,-4.0,0.0)
.addChild(new Shape().setUSE("DARK_GRAY_SPHERE"))
.addChild(new Transform().setTranslation(0.0,-0.7,0.0)
.addChild(new Billboard().setAxisOfRotation(0.0,0.0,0.0)
.addChild(new Shape()
.setAppearance(new Appearance().setUSE("LABEL_APPEARANCE"))
.setGeometry(new Text().setString(new String[] {"spine[i-1]"})
.setFontStyle(new FontStyle().setUSE("LABEL_FONT2"))))))))
.addComments(" Draw tangent and label between spines ")
.addChild(new Group()
.addChild(new Transform().setTranslation(-3.0,0.0,0.0)
.addChild(new Shape()
.setGeometry(new Cylinder().setHeight(8).setRadius(.02))
.setAppearance(new Appearance().setUSE("DARK_GRAY"))))
.addChild(new Transform().setRotation(0.0,0.0,1.0,3.14).setTranslation(-3.0,-3.55,0.0)
.addChild(new Shape()
.setGeometry(new Cone().setBottomRadius(.15).setHeight(.5))
.setAppearance(new Appearance().setUSE("DARK_GRAY"))))
.addChild(new Transform().setTranslation(-3.2,0.0,0.0)
.addChild(new Billboard()
.addChild(new Shape()
.setAppearance(new Appearance().setUSE("LABEL_APPEARANCE"))
.setGeometry(new Text().setString(new String[] {"t a n g e n t"})
.setFontStyle(new FontStyle().setFamily(new String[] {"SANS"}).setHorizontal(false).setJustify(FontStyle.JUSTIFY_MIDDLE_END).setSize(0.5).setCssStyle("ITALIC"))))))
.addChild(new Transform().setRotation(0.0,0.0,1.0,1.57).setTranslation(-1.5,0.0,0.0)
.addChild(new Shape()
.setGeometry(new Cylinder().setHeight(3).setRadius(.015))
.setAppearance(new Appearance()
.setMaterial(new Material().setDiffuseColor(.2,.2,.2).setTransparency(.5)))))
.addChild(new Transform().setTranslation(-2.7,0.15,0.0)
.addChild(new Shape()
.setGeometry(new Cylinder().setHeight(.3).setRadius(.02))
.setAppearance(new Appearance().setUSE("DARK_GRAY"))))
.addChild(new Transform().setRotation(0.0,0.0,1.0,1.57).setTranslation(-2.85,0.3,0.0)
.addChild(new Shape()
.setGeometry(new Cylinder().setHeight(.3).setRadius(.02))
.setAppearance(new Appearance().setUSE("DARK_GRAY")))))
.addComments(" Draw SCP (spine-aligned cross-section plane) and label ")
.addChild(new Group()
.addChild(new Transform()
.addChild(new Shape()
.setGeometry(new IndexedFaceSet().setSolid(false).setCoordIndex(new int[] {0,1,2,3,4,-1})
.setCoord(new Coordinate().setPoint(new MFVec3f(new double[] {1.35,0.0,1.35,1.35,0.0,-1.35,-1.35,0.0,-1.35,-1.35,0.0,1.35,1.35,0.0,1.35}))))
.setAppearance(new Appearance()
.setMaterial(new Material().setDiffuseColor(0.27,0.51,0.71).setTransparency(.5)))))
.addChild(new Transform().setRotation(1.0,0.0,0.0,-1.57).setTranslation(.5,0.0,-1.0)
.addChild(new Shape()
.setGeometry(new Text().setString(new String[] {"SCP"})
.setFontStyle(new FontStyle().setFamily(new String[] {"SANS"}).setSize(0.4).setCssStyle("BOLDITALIC")))
.setAppearance(new Appearance().setUSE("LABEL_APPEARANCE")))))))
.addComments(" Draw title of model ")
.addChild(new Group()
.addChild(new Transform().setTranslation(-0.2,-5.5,0.0)
.addChild(new Shape()
.setGeometry(new Text().setString(new String[] {"Spine-aligned Cross-section Plane (SCP) at Spine Point"})
.setFontStyle(new FontStyle("LABEL_FONT3").setFamily(new String[] {"SANS"}).setJustify(FontStyle.JUSTIFY_MIDDLE_MIDDLE).setSize(0.45).setCssStyle("BOLD")))
.setAppearance(new Appearance().setUSE("LABEL_APPEARANCE")))))));
}
catch (Exception ex)
{
System.err.println ("*** Further hints on X3DJSAIL errors and exceptions at");
System.err.println ("*** https://www.web3d.org/specifications/java/X3DJSAIL.html");
throw (ex);
}
}
// end of initialize() method
/** The initialized model object, created within initialize() method. */
private X3D x3dModel;
/**
* Provide a
* shallow copy
* of the X3D model.
* @see X3D
* @return ExtrusionFigureX3dSpecification model
*/
public X3D getX3dModel()
{
return x3dModel;
}
/**
* Default main() method provided for test purposes, uses CommandLine to set global ConfigurationProperties for this object.
* @param args array of input parameters, provided as arguments
* @see X3D.handleArguments(args)
* @see X3D.validationReport()
* @see CommandLine
* @see CommandLine.USAGE
* @see ConfigurationProperties
*/
public static void main(String args[])
{
System.out.println("Build this X3D model, showing validation diagnostics...");
X3D thisExampleX3dModel = new ExtrusionFigureX3dSpecification().getX3dModel();
// System.out.println("X3D model construction complete.");
// next handle command line arguments
boolean hasArguments = (args != null) && (args.length > 0);
boolean validate = true; // default
boolean argumentsLoadNewModel = false;
String fileName = new String();
if (args != null)
{
for (String arg : args)
{
if (arg.toLowerCase().startsWith("-v") || arg.toLowerCase().contains("validate"))
{
validate = true; // making sure
}
if (arg.toLowerCase().endsWith(X3D.FILE_EXTENSION_X3D) ||
arg.toLowerCase().endsWith(X3D.FILE_EXTENSION_CLASSICVRML) ||
arg.toLowerCase().endsWith(X3D.FILE_EXTENSION_X3DB) ||
arg.toLowerCase().endsWith(X3D.FILE_EXTENSION_VRML97) ||
arg.toLowerCase().endsWith(X3D.FILE_EXTENSION_EXI) ||
arg.toLowerCase().endsWith(X3D.FILE_EXTENSION_GZIP) ||
arg.toLowerCase().endsWith(X3D.FILE_EXTENSION_ZIP) ||
arg.toLowerCase().endsWith(X3D.FILE_EXTENSION_HTML) ||
arg.toLowerCase().endsWith(X3D.FILE_EXTENSION_XHTML))
{
argumentsLoadNewModel = true;
fileName = arg;
}
}
}
if (argumentsLoadNewModel)
System.out.println("WARNING: \"Basic.X3dSpecifications.ExtrusionFigureX3dSpecification\" model invocation is attempting to load file \"" + fileName + "\" instead of simply validating itself... file loading ignored.");
else if (hasArguments) // if no arguments provided, this method produces usage warning
thisExampleX3dModel.handleArguments(args);
if (validate)
{
// System.out.println("--- TODO fix duplicated outputs ---"); // omit when duplicated outputs problem is solved/refactored
String validationResults = thisExampleX3dModel.validationReport();
// System.out.println("-----------------------------------"); // omit when duplicated outputs problem is solved/refactored
System.out.print("Basic.X3dSpecifications.ExtrusionFigureX3dSpecification self-validation test results: ");
if (!validationResults.equals("success"))
System.out.println();
System.out.println(validationResults.trim());
}
}
}