org.web3d.x3d.jsail.Rendering

Class ClipPlaneObject

java.lang.Object

org.web3d.x3d.jsail.X3DConcreteElement

org.web3d.x3d.jsail.X3DConcreteNode

org.web3d.x3d.jsail.Rendering.ClipPlaneObject

All Implemented Interfaces:

X3DChildNode, X3DNode, ClipPlane

public class ClipPlaneObject
extends X3DConcreteNode
implements ClipPlane

X3D node tooltip: (X3D version 3.2 or later) [X3DChildNode] ClipPlane specifies a single plane equation used to clip (i.e. cull or hide) displayed geometry. The plane field specifies a four-component plane equation that describes both inside and outside half space.

• Hint: ClipPlane nodes only affect peer and descendant nodes, thus a parent grouping node can limit its effect.
• Warning: requires X3D profile='Full' or else include <component name='Rendering' level='5'/> Examples: X3D Example Archives, Basic, CAD, Clip Plane Example http://www.web3d.org/x3d/content/examples/Basic/CAD/ClipPlaneExampleIndex.html

Package hint: This org.web3d.x3d.jsail concrete class is used for implementing a standalone X3D object as a Plain Old Java Object (POJO). If you are writing Java code for use inside an X3D Script node, compile separate code using only the org.web3d.x3d.sai package instead.

See Also:

X3D Abstract Specification: ClipPlane, X3D Tooltips: ClipPlane, X3D Scene Authoring Hints

Field Summary

Fields

Modifier and Type	Field and Description
static java.lang.String	COMPONENT String constant COMPONENT defines X3D component for the ClipPlane element: Rendering
static java.lang.String	containerField_DEFAULT_VALUE containerField describes typical field relationship of a node to its parent.
static boolean	ENABLED_DEFAULT_VALUE SFBool field named enabled has default value true (Java syntax) or true (XML syntax).
static java.lang.String	fromField_ENABLED fromField ROUTE name for SFBool field named enabled.
static java.lang.String	fromField_METADATA fromField ROUTE name for SFNode field named metadata.
static java.lang.String	fromField_PLANE fromField ROUTE name for SFVec4f field named plane.
static int	LEVEL Integer constant LEVEL provides default X3D Rendering component level for this element: 5
static java.lang.String	NAME String constant NAME provides name of this element: ClipPlane.
static float[]	PLANE_DEFAULT_VALUE SFVec4f field named plane has default value {0f,1f,0f,0f} (Java syntax) or 0 1 0 0 (XML syntax).
static java.lang.String	toField_ENABLED toField ROUTE name for SFBool field named enabled.
static java.lang.String	toField_METADATA toField ROUTE name for SFNode field named metadata.
static java.lang.String	toField_PLANE toField ROUTE name for SFVec4f field named plane.

Fields inherited from class org.web3d.x3d.jsail.X3DConcreteNode

CLASS_DEFAULT_VALUE, containerField_ALTERNATE_VALUES, DEF_DEFAULT_VALUE, USE_DEFAULT_VALUE

Fields inherited from class org.web3d.x3d.jsail.X3DConcreteElement

validationResult

Constructor Summary

Constructors

Constructor and Description
ClipPlaneObject() Constructor for ClipPlaneObject to initialize member variables with default values.
ClipPlaneObject(java.lang.String DEFlabel) Utility constructor that assigns DEF label after initializing member variables with default values.

Method Summary

Modifier and Type	Method and Description
ClipPlaneObject	addComments(CommentsBlock newCommentsBlock) Add CommentsBlock to contained commentsList.
ClipPlaneObject	addComments(java.lang.String newComment) Add comment as String to contained commentsList.
ClipPlaneObject	addComments(java.lang.String[] newComments) Add comments as String[] array to contained commentsList.
ClipPlaneObject	clearMetadata() Utility method to clear SFNode value of metadata field.
X3DConcreteElement	findElementByNameValue(java.lang.String nameValue) Recursive method to provide object reference to node or statement by name attribute, if found as part of this element or in a contained element.
X3DConcreteElement	findElementByNameValue(java.lang.String nameValue, java.lang.String elementName) Recursive method to provide object reference to node or statement by name attribute, if found as part of this element or in a contained element.
X3DConcreteNode	findNodeByDEF(java.lang.String DEFvalue) Recursive method to provide object reference to node by DEF, if found as this node or in a contained node.
java.lang.String	getAccessType(java.lang.String fieldName) Indicate accessType corresponding to given fieldName.
java.lang.String	getComponent() Defines X3D component for the ClipPlane element: Rendering
int	getComponentLevel() Provides default X3D component level for this element: 5
java.lang.String	getContainerFieldDefault() containerField describes typical field relationship of a node to its parent.
java.lang.String	getElementName() Provides name of this element: ClipPlane
boolean	getEnabled() Provide boolean value from inputOutput SFBool field named enabled.
java.lang.String	getFieldType(java.lang.String fieldName) Indicate type corresponding to given fieldName.
ISObject	getIS() Provide field named IS for establishing IS/connect field connections between ProtoInterface fields and internal ProtoBody nodes.
X3DMetadataObject	getMetadata() Provide X3DMetadataObject instance (using a properly typed node) from inputOutput SFNode field metadata.
float[]	getPlane() Provide array of 4-tuple float results within allowed range of [-1,1] from inputOutput SFVec4f field named plane.
boolean	hasElementByNameValue(java.lang.String nameValue, java.lang.String elementName) Recursive method to determine whether node or statement with given name attribute is found, meaning both objects are attached to same scene graph.
boolean	hasMetadata() Indicate whether an object is available for inputOutput SFNode field metadata.
boolean	hasNodeByDEF(java.lang.String DEFvalue) Recursive method to determine whether node with DEFvalue is found, meaning both objects are attached to same scene graph.
void	initialize() Initialize all member variables to default values.
ClipPlaneObject	setCssClass(SFStringObject newValue) Assign typed object value to SFString cssClass field, similar to setCssClass(String).
ClipPlaneObject	setCssClass(java.lang.String newValue) Accessor method to assign String value to inputOutput SFString field named class.
ClipPlaneObject	setDEF(SFStringObject newValue) Assign typed object value to SFString DEF field, similar to setDEF(String).
ClipPlaneObject	setDEF(java.lang.String newValue) Accessor method to assign String value to inputOutput SFString field named DEF.
ClipPlaneObject	setEnabled(boolean newValue) Accessor method to assign boolean value to inputOutput SFBool field named enabled.
ClipPlaneObject	setEnabled(SFBoolObject newValue) Assign typed object value to SFBool enabled field, similar to setEnabled(boolean).
ClipPlaneObject	setIS(ISObject newValue) Assign field named IS for establishing IS/connect field connections between ProtoInterface fields and internal ProtoBody nodes.
ClipPlaneObject	setMetadata(ProtoInstanceObject newValue) Assign ProtoInstance (using a properly typed node) to inputOutput SFNode field metadata.
ClipPlaneObject	setMetadata(X3DMetadataObject newValue) Accessor method to assign X3DMetadataObject instance (using a properly typed node) to inputOutput SFNode field metadata.
ClipPlaneObject	setPlane(float[] newValue) Accessor method to assign 4-tuple float array to inputOutput SFVec4f field named plane.
ClipPlaneObject	setPlane(float x, float y, float z, float w) Assign values to SFVec4f plane field, similar to setPlane(float[]).
ClipPlaneObject	setPlane(SFVec4fObject newValue) Assign typed object value to SFVec4f plane field, similar to setPlane(float[]).
ClipPlaneObject	setUSE(ClipPlaneObject DEFnode) Assign a USE reference to another DEF node of same node type, similar to setUSE(String).
ClipPlaneObject	setUSE(SFStringObject newValue) Assign typed object value to SFString USE field, similar to setUSE(String).
ClipPlaneObject	setUSE(java.lang.String newValue) Accessor method to assign String value to inputOutput SFString field named USE.
java.lang.String	toStringClassicVRML(int indentLevel) Recursive method to provide ClassicVRML string serialization.
java.lang.String	toStringVRML97(int indentLevel) Recursive method to provide VRML97 string serialization.
java.lang.String	toStringX3D(int indentLevel) Recursive method to provide X3D string serialization of this model subgraph, utilizing XML encoding and conforming to X3D Canonical Form.
java.lang.String	validate() Recursive method to validate this element plus all contained nodes and statements, using both datatype-specification value checks and regular expression (regex) checking of corresponding string values.

Methods inherited from class org.web3d.x3d.jsail.X3DConcreteNode

getContainerFieldAlternateValues, getContainerFieldOverride, getCssClass, getDEF, getUSE, isNode, isStatement, isUSE, resetContainerFieldOverride, setConcreteCssClass, setConcreteDEF, setConcreteUSE, setContainerFieldOverride

Methods inherited from class org.web3d.x3d.jsail.X3DConcreteElement

clearParentObject, findAncestorElementByName, findAncestorProtoBody, findAncestorSceneObject, findAncestorX3DObject, getPackageName, getParentObject, getValidationResult, hasAncestorElementByName, hasAncestorProtoBody, hasAncestorSceneObject, hasAncestorX3DObject, setParentObject, toStringClassicVRML, toStringVRML97, toStringX3D

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Field Detail

NAME

public static final java.lang.String NAME

String constant NAME provides name of this element: ClipPlane.

See Also:

Constant Field Values

COMPONENT

public static final java.lang.String COMPONENT

String constant COMPONENT defines X3D component for the ClipPlane element: Rendering

See Also:

Constant Field Values

LEVEL

public static final int LEVEL

Integer constant LEVEL provides default X3D Rendering component level for this element: 5

See Also:

Constant Field Values

ENABLED_DEFAULT_VALUE

public static final boolean ENABLED_DEFAULT_VALUE

SFBool field named enabled has default value true (Java syntax) or true (XML syntax).

See Also:

Constant Field Values

PLANE_DEFAULT_VALUE

public static final float[] PLANE_DEFAULT_VALUE

SFVec4f field named plane has default value {0f,1f,0f,0f} (Java syntax) or 0 1 0 0 (XML syntax).

containerField_DEFAULT_VALUE

public static final java.lang.String containerField_DEFAULT_VALUE

containerField describes typical field relationship of a node to its parent. Usage is not ordinarily needed when using this API, default value is provided for informational purposes.

See Also:

X3D Scene Authoring Hints: containerField, X3D Unified Object Model (X3DUOM), Constant Field Values

fromField_ENABLED

public static final java.lang.String fromField_ENABLED

fromField ROUTE name for SFBool field named enabled.

See Also:

Constant Field Values

toField_ENABLED

public static final java.lang.String toField_ENABLED

toField ROUTE name for SFBool field named enabled.

See Also:

Constant Field Values

fromField_METADATA

public static final java.lang.String fromField_METADATA

fromField ROUTE name for SFNode field named metadata.

See Also:

Constant Field Values

toField_METADATA

public static final java.lang.String toField_METADATA

toField ROUTE name for SFNode field named metadata.

See Also:

Constant Field Values

fromField_PLANE

public static final java.lang.String fromField_PLANE

fromField ROUTE name for SFVec4f field named plane.

See Also:

Constant Field Values

toField_PLANE

public static final java.lang.String toField_PLANE

toField ROUTE name for SFVec4f field named plane.

See Also:

Constant Field Values

Constructor Detail

ClipPlaneObject

public ClipPlaneObject()

Constructor for ClipPlaneObject to initialize member variables with default values.

ClipPlaneObject

public ClipPlaneObject(java.lang.String DEFlabel)

Utility constructor that assigns DEF label after initializing member variables with default values.

Parameters:

DEFlabel - unique DEF name for this X3D node

Method Detail

getElementName

public final java.lang.String getElementName()

Provides name of this element: ClipPlane

Specified by:

getElementName in class X3DConcreteElement

Returns:

name of this element

getComponent

public final java.lang.String getComponent()

Defines X3D component for the ClipPlane element: Rendering

Specified by:

getComponent in class X3DConcreteElement

Returns:

X3D component for this element

getComponentLevel

public final int getComponentLevel()

Provides default X3D component level for this element: 5

Specified by:

getComponentLevel in class X3DConcreteElement

Returns:

default X3D component level for this element

getFieldType

public java.lang.String getFieldType(java.lang.String fieldName)

Indicate type corresponding to given fieldName.

Specified by:

getFieldType in class X3DConcreteElement

Parameters:

fieldName - name of field in this X3D node

Returns:

X3D type (SFvec3f etc.), otherwise ConfigurationProperties.ERROR_UNKNOWN_FIELD_TYPE if not recognized

See Also:

ConfigurationProperties.ERROR_UNKNOWN_FIELD_TYPE

getAccessType

public java.lang.String getAccessType(java.lang.String fieldName)

Indicate accessType corresponding to given fieldName.

Specified by:

getAccessType in class X3DConcreteElement

Parameters:

fieldName - name of field in this X3D node

Returns:

X3D accessType (inputOnly etc.), otherwise ConfigurationProperties.ERROR_UNKNOWN_FIELD_ACCESSTYPE if not recognized

See Also:

ConfigurationProperties.ERROR_UNKNOWN_FIELD_ACCESSTYPE

getContainerFieldDefault

public final java.lang.String getContainerFieldDefault()

containerField describes typical field relationship of a node to its parent. Usage is not ordinarily needed when using this API, default value is provided for informational purposes.

Specified by:

getContainerFieldDefault in class X3DConcreteNode

Returns:

default containerField value

See Also:

X3D Scene Authoring Hints: containerField, X3D Unified Object Model (X3DUOM)

initialize

public final void initialize()

Initialize all member variables to default values.

Overrides:

initialize in class X3DConcreteNode

getEnabled

public boolean getEnabled()

Provide boolean value from inputOutput SFBool field named enabled.

Tooltip: Enables/disables node operation. *

Specified by:

getEnabled in interface ClipPlane

Returns:

value of enabled field

setEnabled

public ClipPlaneObject setEnabled(boolean newValue)

Accessor method to assign boolean value to inputOutput SFBool field named enabled.

Tooltip: Enables/disables node operation. *

Specified by:

setEnabled in interface ClipPlane

Parameters:

newValue - is new value for the enabled field.

Returns:

ClipPlaneObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

setEnabled

public ClipPlaneObject setEnabled(SFBoolObject newValue)

Assign typed object value to SFBool enabled field, similar to setEnabled(boolean).

Parameters:

newValue - is new value for the enabled field.

Returns:

ClipPlaneObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

getMetadata

public X3DMetadataObject getMetadata()

Provide X3DMetadataObject instance (using a properly typed node) from inputOutput SFNode field metadata.

Specified by:

getMetadata in interface X3DChildNode

Specified by:

getMetadata in interface X3DNode

Specified by:

getMetadata in interface ClipPlane

Returns:

value of metadata field

See Also:

getMetadataProtoInstance(), X3D Scene Authoring Hints: Metadata Nodes

setMetadata

public ClipPlaneObject setMetadata(X3DMetadataObject newValue)

Accessor method to assign X3DMetadataObject instance (using a properly typed node) to inputOutput SFNode field metadata.

Specified by:

setMetadata in interface X3DChildNode

Specified by:

setMetadata in interface X3DNode

Specified by:

setMetadata in interface ClipPlane

Specified by:

setMetadata in class X3DConcreteNode

Parameters:

newValue - is new value for the metadata field.

Returns:

ClipPlaneObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

See Also:

setMetadata(ProtoInstanceObject), X3D Scene Authoring Hints: Metadata Nodes

clearMetadata

public ClipPlaneObject clearMetadata()

Utility method to clear SFNode value of metadata field.

Returns:

ClipPlaneObject - namely this same object to allow sequential method pipelining (i.e. consecutive setAttribute method invocations).

setMetadata

public ClipPlaneObject setMetadata(ProtoInstanceObject newValue)

Assign ProtoInstance (using a properly typed node) to inputOutput SFNode field metadata.

Specified by:

setMetadata in class X3DConcreteNode

Parameters:

newValue - is new value for the metadata field.

Returns:

ClipPlaneObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

See Also:

setMetadata(X3DMetadataObject)

hasMetadata

public boolean hasMetadata()

Indicate whether an object is available for inputOutput SFNode field metadata.

Returns:

whether a properly typed node or ProtoInstance or CommentsBlock is available.

See Also:

getMetadata(), getMetadataProtoInstance(), X3D Scene Authoring Hints: Metadata Nodes

getPlane

public float[] getPlane()

Provide array of 4-tuple float results within allowed range of [-1,1] from inputOutput SFVec4f field named plane.

Tooltip: [0,1] If (a,b,c,d) is the plane, with the first three components being a normalized vector describing the plane's normal direction (and thus the fourth component d being distance from the origin), a point (x,y,z) is visible to the user, with regards to the clipping plane, if a*x+b*y+c*z+d is greater than 0.

• Warning: (a, b, c) value of (0, 0, 0) is forbidden since the zero vector has ambiguous direction and is thus degenerate, not defining a plane.
• Hint: negate all plane values to reverse which side of plane has visibility clipped.
• Hint: plane-geometry equations http://en.wikipedia.org/wiki/Plane_(geometry)#Point-normal_form_and_general_form_of_the_equation_of_a_plane
• Hint: plane-geometry distance to point http://en.wikipedia.org/wiki/Plane_(geometry)#Distance_from_a_point_to_a_plane

Specified by:

getPlane in interface ClipPlane

Returns:

value of plane field

setPlane

public ClipPlaneObject setPlane(float[] newValue)

Accessor method to assign 4-tuple float array to inputOutput SFVec4f field named plane.

Tooltip: [0,1] If (a,b,c,d) is the plane, with the first three components being a normalized vector describing the plane's normal direction (and thus the fourth component d being distance from the origin), a point (x,y,z) is visible to the user, with regards to the clipping plane, if a*x+b*y+c*z+d is greater than 0.

• Warning: (a, b, c) value of (0, 0, 0) is forbidden since the zero vector has ambiguous direction and is thus degenerate, not defining a plane.
• Hint: negate all plane values to reverse which side of plane has visibility clipped.
• Hint: plane-geometry equations http://en.wikipedia.org/wiki/Plane_(geometry)#Point-normal_form_and_general_form_of_the_equation_of_a_plane
• Hint: plane-geometry distance to point http://en.wikipedia.org/wiki/Plane_(geometry)#Distance_from_a_point_to_a_plane

Specified by:

setPlane in interface ClipPlane

Parameters:

newValue - is new value for the plane field.

Returns:

ClipPlaneObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

setPlane

public ClipPlaneObject setPlane(SFVec4fObject newValue)

Assign typed object value to SFVec4f plane field, similar to setPlane(float[]).

Parameters:

newValue - is new value for the plane field.

Returns:

ClipPlaneObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

setPlane

public ClipPlaneObject setPlane(float x,
                                float y,
                                float z,
                                float w)

Assign values to SFVec4f plane field, similar to setPlane(float[]).

Parameters:

x - first component

y - second component

z - third component

w - fourth component

Returns:

ClipPlaneObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

setDEF

public final ClipPlaneObject setDEF(java.lang.String newValue)

Accessor method to assign String value to inputOutput SFString field named DEF.

Tooltip: DEF defines a unique ID name for this node, referenceable by other nodes.

• Hint: descriptive DEF names improve clarity and help document a model.
• Hint: well-defined names can simplify design and debugging through improved author understanding.
• Hint: X3D Scene Authoring Hints, Naming Conventions http://www.web3d.org/x3d/content/examples/X3dSceneAuthoringHints.html#NamingConventions

Note that setting the DEF value clears the USE value.

Specified by:

setDEF in interface X3DChildNode

Specified by:

setDEF in interface X3DNode

Specified by:

setDEF in interface ClipPlane

Specified by:

setDEF in class X3DConcreteNode

Parameters:

newValue - is new value for the DEF field.

Returns:

ClipPlaneObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

setDEF

public ClipPlaneObject setDEF(SFStringObject newValue)

Assign typed object value to SFString DEF field, similar to setDEF(String).

Parameters:

newValue - is new value for the DEF field.

Returns:

ClipPlaneObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

setUSE

public final ClipPlaneObject setUSE(java.lang.String newValue)

Accessor method to assign String value to inputOutput SFString field named USE.

Tooltip: USE means reuse an already DEF-ed node ID, excluding all child nodes and all other attributes (except for containerField, which can have a different value).

• Hint: USE references to previously defined DEF geometry (instead of duplicating nodes) can improve performance.
• Warning: do NOT include any child nodes, a DEF attribute, or any other attribute values (except for containerField) when defining a USE attribute.
• Warning: each USE value must match a corresponding DEF value that is defined earlier in the scene.

Note: each USE node is still an independent object, with the USE value matching the DEF value in the preceding object.

Warning: invoking the setUSE() method on this node resets all other fields to their default values (except for containerField) and also releases all child nodes.

Warning: no other operations can be performed to modify a USE node other than setting an alternate containerField value.

Specified by:

setUSE in interface X3DChildNode

Specified by:

setUSE in interface X3DNode

Specified by:

setUSE in interface ClipPlane

Specified by:

setUSE in class X3DConcreteNode

Parameters:

newValue - is new value for the USE field.

Returns:

ClipPlaneObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

setUSE

public ClipPlaneObject setUSE(SFStringObject newValue)

Assign typed object value to SFString USE field, similar to setUSE(String).

Parameters:

newValue - is new value for the USE field.

Returns:

ClipPlaneObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

setCssClass

public final ClipPlaneObject setCssClass(java.lang.String newValue)

Accessor method to assign String value to inputOutput SFString field named class.

Tooltip: The class attribute is a space-separated list of classes, reserved for use by CSS cascading stylesheets.

• Warning: currently the class attribute is only supported in XML encoding of X3D scenes.
• Hint: W3C Cascading Style Sheets https://www.w3.org/Style/CSS

Specified by:

setCssClass in interface X3DChildNode

Specified by:

setCssClass in interface X3DNode

Specified by:

setCssClass in interface ClipPlane

Specified by:

setCssClass in class X3DConcreteNode

Parameters:

newValue - is new value for the class field.

Returns:

ClipPlaneObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

See Also:

W3C Cascading Style Sheets

setCssClass

public ClipPlaneObject setCssClass(SFStringObject newValue)

Assign typed object value to SFString cssClass field, similar to setCssClass(String).

Parameters:

newValue - is new value for the class field.

Returns:

ClipPlaneObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

setIS

public ClipPlaneObject setIS(ISObject newValue)

Assign field named IS for establishing IS/connect field connections between ProtoInterface fields and internal ProtoBody nodes. The IS statement connects node fields defined inside a ProtoBody declaration back to corresponding ProtoInterface fields.

Specified by:

setIS in class X3DConcreteNode

Parameters:

newValue - is new value for the description field.

Returns:

ClipPlaneObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

See Also:

X3D Tooltips: IS, X3D Tooltips: connect

getIS

public ISObject getIS()

Provide field named IS for establishing IS/connect field connections between ProtoInterface fields and internal ProtoBody nodes. The IS statement connects node fields defined inside a ProtoBody declaration back to corresponding ProtoInterface fields.

Specified by:

getIS in class X3DConcreteNode

Returns:

current ISObject, if any.

See Also:

X3D Tooltips: IS, X3D Tooltips: connect

setUSE

public ClipPlaneObject setUSE(ClipPlaneObject DEFnode)

Assign a USE reference to another DEF node of same node type, similar to setUSE(String).

Warning: note that the setUSE() method on this node resets all other fields to their default values (except for containerField) and also releases all child nodes.

Warning: no other operations can be performed to modify a USE node other than setting an alternate containerField value.

Parameters:

DEFnode - must have a DEF value defined

Returns:

ClipPlaneObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

addComments

public ClipPlaneObject addComments(java.lang.String newComment)

Add comment as String to contained commentsList.

Specified by:

addComments in class X3DConcreteElement

Parameters:

newComment - initial value

Returns:

ClipPlaneObject - namely this same object to allow sequential method pipelining (i.e. consecutive setAttribute method invocations).

addComments

public ClipPlaneObject addComments(java.lang.String[] newComments)

Add comments as String[] array to contained commentsList.

Specified by:

addComments in class X3DConcreteElement

Parameters:

newComments - array of comments

Returns:

ClipPlaneObject - namely this same object to allow sequential method pipelining (i.e. consecutive setAttribute method invocations).

addComments

public ClipPlaneObject addComments(CommentsBlock newCommentsBlock)

Add CommentsBlock to contained commentsList.

Specified by:

addComments in class X3DConcreteElement

Parameters:

newCommentsBlock - block of comments to add

Returns:

ClipPlaneObject - namely this same object to allow sequential method pipelining (i.e. consecutive setAttribute method invocations).

toStringX3D

public java.lang.String toStringX3D(int indentLevel)

Recursive method to provide X3D string serialization of this model subgraph, utilizing XML encoding and conforming to X3D Canonical Form.

Specified by:

toStringX3D in class X3DConcreteElement

Parameters:

indentLevel - number of levels of indentation for this element

Returns:

X3D string

See Also:

X3DObject.FILE_EXTENSION_X3D, X3DObject.FILE_EXTENSION_XML, X3DObject.toStringXML(), X3DObject.toFileXML(String), X3DObject.toFileX3D(String), X3D XML Encoding, X3D Compressed Binary Encoding: X3D Canonical Form, X3D Canonicalization (C14N) Tool

toStringClassicVRML

public java.lang.String toStringClassicVRML(int indentLevel)

Recursive method to provide ClassicVRML string serialization.

Specified by:

toStringClassicVRML in class X3DConcreteElement

Parameters:

indentLevel - number of levels of indentation for this element

Returns:

ClassicVRML string

See Also:

X3DObject.FILE_EXTENSION_CLASSICVRML, X3D Resources: Virtual Reality Modeling Language (VRML) 97, Extensible 3D (X3D) encodings Part 2: Classic VRML encoding, Extensible 3D (X3D) encodings Part 2: Classic VRML encoding, Annex A: Grammar

toStringVRML97

public java.lang.String toStringVRML97(int indentLevel)

Recursive method to provide VRML97 string serialization.

Specified by:

toStringVRML97 in class X3DConcreteElement

Parameters:

indentLevel - number of levels of indentation for this element

Returns:

VRML97 string

See Also:

X3DObject.FILE_EXTENSION_VRML97, X3D Resources: Virtual Reality Modeling Language (VRML) 97, Virtual Reality Modeling Language (VRML) 97 specification, VRML 97 v2.1 Amendment

findElementByNameValue

public X3DConcreteElement findElementByNameValue(java.lang.String nameValue)

Recursive method to provide object reference to node or statement by name attribute, if found as part of this element or in a contained element. Elements with name fields include meta, Metadata* nodes, field/fieldValue, ProtoDeclare/ExternProtoDeclare/ProtoInstance, CAD and HAnim nodes.

Warning: first start with findAncestorSceneObject() to check entire scene graph, or findAncestorX3DObject() to check entire model document.

Warning: more than one element may be found that has the same name, this method does not handle that case.

Specified by:

findElementByNameValue in class X3DConcreteElement

Parameters:

nameValue - is value of the name field being searched for in this element and child elements(if any)

Returns:

object reference to found element, null otherwise

See Also:

findNodeByDEF(String), X3DConcreteElement.hasAncestorSceneObject(), X3DConcreteElement.findAncestorX3DObject()

findElementByNameValue

public X3DConcreteElement findElementByNameValue(java.lang.String nameValue,
                                                 java.lang.String elementName)

Recursive method to provide object reference to node or statement by name attribute, if found as part of this element or in a contained element. Elements with name fields include meta, Metadata* nodes, field/fieldValue, ProtoDeclare/ExternProtoDeclare/ProtoInstance, CAD and HAnim nodes.

Warning: first start with findAncestorSceneObject() to check entire scene graph, or findAncestorX3DObject() to check entire model document.

Warning: more than one element may be found that has the same name, this method does not handle that case.

Specified by:

findElementByNameValue in class X3DConcreteElement

Parameters:

nameValue - is value of the name field being searched for in this element and child elements(if any)

elementName - identifies the element of interest (meta MetadataString ProtoDeclare CADassembly ProtoInstance HAnimHumanoid etc.)

Returns:

object reference to found element, null otherwise

See Also:

findNodeByDEF(String), X3DConcreteElement.hasAncestorSceneObject(), X3DConcreteElement.findAncestorX3DObject()

hasElementByNameValue

public boolean hasElementByNameValue(java.lang.String nameValue,
                                     java.lang.String elementName)

Recursive method to determine whether node or statement with given name attribute is found, meaning both objects are attached to same scene graph.

Parameters:

nameValue - is value of the name field being searched for in this element and child elements(if any)

elementName - identifies the element of interest (meta MetadataString ProtoDeclare CADassembly ProtoInstance HAnimHumanoid etc.)

Returns:

whether node is found

See Also:

findElementByNameValue(String, String)

findNodeByDEF

public X3DConcreteNode findNodeByDEF(java.lang.String DEFvalue)

Recursive method to provide object reference to node by DEF, if found as this node or in a contained node.

Warning: first start with findAncestorSceneObject() to check entire scene graph, or findAncestorX3DObject() to check entire model document.

Warning: more than one element may be found that has the same DEF, this method does not handle that case.

Specified by:

findNodeByDEF in class X3DConcreteElement

Parameters:

DEFvalue - is value of the name field being searched for in this element and child elements(if any)

Returns:

object reference to found node, null otherwise

See Also:

findElementByNameValue(String), X3DConcreteElement.hasAncestorSceneObject(), X3DConcreteElement.findAncestorX3DObject()

hasNodeByDEF

public boolean hasNodeByDEF(java.lang.String DEFvalue)

Recursive method to determine whether node with DEFvalue is found, meaning both objects are attached to same scene graph.

Parameters:

DEFvalue - is value of the name field being searched for in this element and child elements(if any)

Returns:

whether node is found

See Also:

findNodeByDEF(String)

validate

public java.lang.String validate()

Recursive method to validate this element plus all contained nodes and statements, using both datatype-specification value checks and regular expression (regex) checking of corresponding string values.

Specified by:

validate in class X3DConcreteElement

Returns:

validation results (if any)